Board logo

Ignition lead rubber caps
02GF74 - 20/2/06 at 09:41 AM

I'm on the scrounge for some igntion lead caps that fit onto the distributor.

In the photo below, it is the tiny caps, 3 shown, that I am after (left most lead) and a couple of the larger ones (lowermost lead)

If you have some old leads that you are chucking in the bin, then I can send you SAE for the caps.

ignition lead caps
ignition lead caps

note the novel use of squash balls

[Edited on 20/2/06 by 02GF74]