I have two locost ideas but both will need a small amount of fabing.
First one is a standard bike can. And the second is THIS It just needs the curved outlet pipe and a mounting bracket.
Let us know what you think as im still pondering....
Morning. Does anyone have a good chrome silencer going cheap? 2 inch inlet for mounting on the passenger side?
Cash waiting.
There have been a few on flea bay recently.
Dan I am also looking for the same. If you want ready to fit then thay are fetching good money on ebay, more than I want to pay at the min
I have two locost ideas but both will need a small amount of fabing.
First one is a standard bike can. And the second is
THIS It just needs
the curved outlet pipe and a mounting bracket.
Let us know what you think as im still pondering....
Would a bike can get through sva?
I cant see why not if its a standard one. Its all marked up as being road leagal.
Its still leagal on a trike. So why not a car.
This would be easy to mod. Just turn up a spacer on a lathe. ebay
Warren,
THIS is listed as
13.75" X 26" if the 13.75 is the dia of the can then it's bloody huge! No wonder he says make sure it will fit under your car!
quote:
Dan I am also looking for the same. If you want ready to fit then thay are fetching good money on ebay, more than I want to pay at the min
Second that Dan
I think you would find thats the circumfrance bkloco 
if you look at the pic it tells you inlet/outlet 2" and the dia looks no more than 3
times that. I reckon about 6" but ill ask.
Bkloco have them plugs arived yet m8?
Were they from you Warren?
In a Jiffy bag covered in parcel tape?
A set arrived today but I bought a set from e-bay for 99p and I wasn't sure if they were those.
I was waiting for an address for you so I could send a beer token.
I've got all the plugs now plus some extras except one.
I can't find the one for the fast idle valve yet. Ford it seems use whatever they have handy at the time. so far I've seen 4 different types
none of which are like mine
By the way if that exhaust can is 6" dia then the circumfrancewould be 18"+
13.75 is about 41/2" dia so I can't imagine what he's measured.
quote:
Originally posted by Danozeman
Morning. Does anyone have a good chrome silencer going cheap? 2 inch inlet for mounting on the passenger side?
Cash waiting.
Originally posted by Danozeman
Morning. Does anyone have a good chrome silencer going cheap? 2 inch inlet for mounting on the passenger side?
Cash waiting.
--------------------------------------------------------------------------------
I've just got a very nice Westfield one off ebay. Only 57 quid. Come to think of it I seem to remember you bid 35 for it. Came with heat
shield and fitting kit. Getting on for 300 quid in Westfield catalogue. 
I emailed the ebay seller of the s/s boxes that warren (big_wasa) added to the thread to ask about the size,the seller has now revised the listing to
make it a boit clearer.
The box/can is 13.75" long and the diameter is 5.5"
I'm thinking the box is a bit short
I spent ages looking for car type silencers that were cheap, but all were to short or to small a diameter.
I eventually used the ends from an MGB back box and made my own outer casing from 18 gauge ally rolled and riveted at the seam on the bottom, i used
some 50mm perf tube to extend the original inner pipe and riveted the ends on after packing with loft insulation.
The result was quite good for a while but eventually the rivets started to come loose so a mk 2 is now needed.
I tried a micron carbon bike can for a while , it gave good power but was to noisy to drive any distance without earplugs.
Paul.
quote:
Originally posted by bob
I emailed the ebay seller of the s/s boxes that warren (big_wasa) added to the thread to ask about the size,the seller has now revised the listing to make it a boit clearer.
The box/can is 13.75" long and the diameter is 5.5"
I'm thinking the box is a bit short
I'm looking at doing a twin exhaust system that will exit at the rear (if everything goes to plan), so i'm on the lookout for a pair of
exhaust cans the same.
cheers
Ian
quote:
I've just got a very nice Westfield one off ebay. Only 57 quid. Come to think of it I seem to remember you bid 35 for it. Came with heat shield and fitting kit. Getting on for 300 quid in Westfield catalogue.
I had a bid on a few. Iv gone for 907's one. He is localish to me so i can collect and the quality will be superb.
Nice looking can. Hope it's quiet enough for SVA cos it's half length of many standard ones.