Can someone please take a picture of their Fury Sports Cars manufacturers plate and also post the dimensions too?

I have asked Steve and Jay at Fury to send me the details as they can't get any done at a reasonable cost and C.D.M. on here has offered to take a look but I am still waiting for Fury to send anything (plus other stuff....!)

Really look good too see here

[Edited on 6/3/16 by tims31]

this thead may help,
http://www.locostbuilders.co.uk/viewthread.php?tid=200662

even a photo of a fury one too.

note, do check the information needed on the plate in the iva manual too.

If it's for IVA and you don't get exactly what you want I got this made by atrophy engraver on eBay, passed IVA last week.


[img]
vin plate [/img]

Thanks guys,

I seem to recall the original Fury ones had some sort of image on too, I may have to have a look in the Fury gallery incase there is one in there..

After having spent the last 10 months trying to get details of the manufacturers plate from Fury and getting nothing back I finally gave up and designed my own.

Have previously spoken to Clive when he posted details of his skills on here I contacted him and provided an image of what I needed and he made this within a couple of days.


Description

Good piece of work and he has the equipment to do lots of stuff that people may be interested in on here, dashboards , centre consols etc

NTDWM but have a look at their work http://www.garagistauk.com/

Is that printed on the Carbon? I thought VIN numbers had to be stamped not printed ?

quote:

---

Originally posted by jeffw
Is that printed on the Carbon? I thought VIN numbers had to be stamped not printed ?

---

code:
6. All plate(s) must be indelibly marked with the Vehicle Identification Number (VIN) which matches the number marked into the vehicle structure
and is displayed in the correct order inside a clearly marked rectangle. (See below and Notes 1, 2 & 5). 

code:
Note 1: For markings to be considered 'indelible' they should be unlikely to become disfigured or obliterated during the life of the
vehicle. Whilst stamping or engraving is preferable it is possible to accept a printed or painted plate providing it has been treated in such a way
that it is most unlikely that essential information would be obliterated or defaced during the normal life of the vehicle. 

code:
7. The Stamped in VIN must be marked on the chassis, frame or other similar structure which is not easily removable, on the right hand side of
the vehicle when viewed from the rear. (see Notes 6, 8, 9 and 12)  8. The Stamped in VIN must be placed in a clearly visible and accessible position
by a method such as hammering, stamping, etching (metal chassis) or embossed, moulded into the structure (glass fibre or carbon fibre chassis) so that
it cannot be obliterated or deteriorate. 

quote:

---

Originally posted by jeffw
Is that printed on the Carbon? I thought VIN numbers had to be stamped not printed ?

---