Blue silicone hose
greavesy7 - 6/12/14 at 05:30 PM
Does anybody have any blue silicone hose knocking around the garage either 32mm and 11mm Id
samjc - 7/12/14 at 08:21 AM
What lengths as i have 32mm i belive but ill check. I mainly have bends
greavesy7 - 7/12/14 at 10:01 AM
About 3 " would do it
davidimurray - 7/12/14 at 10:01 AM
Drop Eddie99 a u2u - he was having a clearout recently.
samjc - 7/12/14 at 11:32 AM
Ill check this afternoon.
tims31 - 7/12/14 at 03:36 PM
Hi Samjc,
If greavesy7 doesnt ant any of the 32mm bends i'm after some. If you have any i'll let you know what i need.
Thanks
Volvorsport - 7/12/14 at 03:39 PM
I've got quite a bit of s/hand stuff....90/45 degree and straight.
tims31 - 7/12/14 at 03:48 PM
Great, I'll have a look at my rad and engine tomorrow and let you kno what I need if thats ok? Can't get to it till tomorrow.
Volvorsport - 7/12/14 at 04:14 PM
I've got it to hand.. I've got a beading machine if you need the ally doing too.
samjc - 7/12/14 at 06:55 PM
No problem just let me know as got a bag full of bits just needing more ali tube as all mines just for connecting.
tims31 - 10/12/14 at 02:23 PM
apologies for taking so long to respond I've been trying to work out how best to show the configuration I am trying to achieve.
Anyhow, hopefully the attached images explain what I need and you can tell me what you have or if it can be done.
So what I think I need is:
two 32mm 90 degree hoses
a metre length of 32mm straight hose
One hose with about a 120 degree bend with one end 35mm and another 32mm if possible or 35mm if not
One 90degree hose ith one end 35mm and the other 32mm if possible or 35mm if not
500mm ali tube with a bead on each end
The first image shows a rough guide of what the layout should be and the others roughly what I need.
Description
bottom-hose-layout
top-hose-layout
samjc - 11/12/14 at 01:37 AM
Will double check but belive all mine to be 32mm. Got a few 90° bends will get a picture and details of other bits i have.
tims31 - 11/12/14 at 09:18 PM
Great, thanks very much.
Dooey99 - 13/12/14 at 01:16 PM
thats exactly the same setup as i have on my 7 but i dont have the heater matrix it works a treat, i got all my hose and pipe from Auto Silicone
Hoses. prices were very reasonable. all though i do know from another experience that old hoover pipe works well like when you get all those
extensions with your vax that make it like 3 miles long yeah... i used them on another car i done instead of buying 32mm pipe not thats its expensive
i just had it to hand.
samjc - 13/12/14 at 07:20 PM
Tim31 u2u sent.
tims31 - 15/12/14 at 07:30 PM
Replied Sam,
What I am trying to achieve looks a bit like this although not quite to the correct scale.
Rad-bot-hoses
mk85 - 16/12/14 at 11:01 AM
Try looking on amazon there's loads on there and very well priced
