I'm plumbing the Megasquirt at the moment and need some extra fuses... to cut a long story short, I seem to have binned the connectors out of the fuse box that I didn't need during the initial build... so, any one got any spare connectors with wire or a spare fuse box or even a whole loom???

Its the single connectors where the fuses plug in.
I've got 5 gaps to fill if any one can help. Thanks.
Rescued attachment P1000182.jpg

Vehicle wiring - possibly terminals FBB16U . Have a look here half way down at the 16 way fuse box bit.

Wyn

Great minds think alike

Although, i am officially off building, I am stripping down the wiring loom that i kept from my clio.

It's a mess hence I have been thinking of starting supplying wiring looms to fellow locostbuilders hopefully on a decent budget.

Forgot to add.

IF ONLY YOU HAD ASKED 3 HOURS EARLIER, i wouldn't have sliced the cables so close to the connectors or packed up everything in the box and put it back in storage.

[Edited on 19/1/10 by l0rd]

I have found another website that is quite good as well with loads of parts

http://www.autoelectricsupplies.co.uk/

I need oem connectors from the original fusebox, get my request?

They look like this:
Rescued attachment AutomotiveElectricalConnector-PackConIII.jpg

One of these would do from VWP but theres no way I'm paying £7 for it..... the bottom connector is what I'm after.

[Edited on 20/1/10 by coozer]
Rescued attachment rs3f.jpg

Have you tried washington auto electrics, swan industrial estate, washington
He is usually helpfull.

That is the FBB16U terminal from Vehicle Wiring Products! They sell them in packs of 10 reference: 3-7900




[Edited on 20/1/10 by lsdweb]