Hi all, has anyone got a pair of front indicators what they have passed the SVA or IVA with, that they dont need anymore.

I just used small bike ones (oxford range) on 5" extended Stalks. (made the extensions out of a bit of tube with a nut clamped into it at each end)

Hope this helpd.

Remember to put a bit of Ali behind the nut if you bolt to the fiberglass to give it strength and stop the f/glass flexing.

Ofcourse after the SVA the extensions "Fell off"

[Edited on 12/1010/09 by mad4x4]

Hi mad4x4 have you got any pics

I went for some Land Rover ones held forwards on lengths of black 40mm waste pipe. At each end I made a flange of MDF (also painted black) which was bolted beneath the headlight support at the rear and which the indicator screwed into at the front.

Yours are great Ben, but they prob need to be further out than that on an MK.

I have a couple of extenders that I made that aren't being used at the moment. I think they are something like M10Fine on the outside to take a normal or aftermarket bike indicator and M10 normal on the inside to bolt to the nosecone...

Think I have a pic somewhere...


Description

Steve I think said extenders are actually in my sva bits box.

Your welcome them back if they will be any use for project "x", or you can pass them on.