jambojeef
|
| posted on 25/8/08 at 02:35 PM |
|
|
Biking Gear, Locost Bits, Random Tat - Stuff 4 U!
Few bits and bobs for your perusal. Tonnes of CBR1000 bits aswell but too many to list so U2U if you have a need for any engine bits. Must get rid
since I have a feeling we are moving again at xmas!
Pics in my photo archive - feel free to have a nose!
Lazer Strike Helmet L - (60cm) Nice helmet with seat-belt style buckle, ACU Gold Star approved, dark visor + clear, spare lug for visor too.
Worn for a summer on various bikes and then on and off for a year after that - its very comfy and quiet. Never dropped but one or two scratches here
and there. All vents open and close as they should. Comes with a Lazer helmet bag - £40 posted
Ixon Biker Jacket - SOLD Waterproof and very warm. Removable inner thermal liner, worn a few times - during one of which the bike spat me off
down the road so theres a little burst at one of the seams which my mum sewd up - cheers mum! Wore it in the car on the way to several SVA tests and
it was very dry! Ive got a 42" chest and its a bit big on me £30 posted
Ixon Biker Trews - SOLD - Match the above although I cant get them to zip together. Hip and knee protection - as new. Thermal liner which can
be zipped out. Fit waist 34" - £30 posted
Spidi H2-Out Waterproof gloves - Kevlar lined with cuff velcro fastening. Nearly new - £15 posted
Will do a deal if you wanted to take the whole biking gear as one lot - U2U if interested.
14 x Alloy Wheel nuts (Ford Fitment) - SOLD - £10 posted, quite heavy sorry!
3/16 Copper Brake Pipe (About 1.5m) - £5 posted
Low oil pressure switch 1/8 NPT fitment with wiring connector and rubber boot - £4 posted
SVA Trim in a Bag
Large metal cored rubber U trim - new but cut into 3 lengths:
1.8m
0.6m
2.2m +
Self adhesive soft rubber trim - 3 types see the pics in the archive.
£8 posted for all the above
Black Alloy heatsink - 150mm x 90mm x 15mm. Was going to use to mount my regulator on to prolong its life but never did in the end. £5
posted
Tonneau Cover! - Another abandoned project! Individually tailored for a 7esque kit car by a company in the fens. I was going to get the sewing
machine out and modify it to fit mine so Ive unpicked the widthways seam at the back and cut the rear most section down the middle with the intention
of adding a some material. It has press studs all around the edge and cut outs for the roll hoop and a zip through the middle of the passenger
compartment. U2U for dimensions.
Think thats it but I seem to have accumulated so much stuff that if you need anything like alloy plate or hoses of any kind drop me a U2U I probably
have it somewhere...
Cheers
Geoff
[Edited on 25/8/08 by jambojeef]
[Edited on 25/8/08 by jambojeef]
[Edited on 25/8/08 by jambojeef]
[Edited on 25/8/08 by jambojeef]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Peteff
|
| posted on 25/8/08 at 02:57 PM |
|
|
What colour are the jacket and trousers Geoff?
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
jambojeef
|
| posted on 25/8/08 at 03:00 PM |
|
|
Hello,
There should be pics in my archive - will just check they work ok...
Jacket is blue, black and white
Trews are black with scotchlite panels in a couple of places
Let me know if the photos arent working, just gonna check now...
Geoff
|
|
|
Peteff
|
| posted on 25/8/08 at 03:02 PM |
|
|
I didn't see the reference to the archive Geoff, must pay attention 
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
jambojeef
|
| posted on 25/8/08 at 03:11 PM |
|
|
Thats alright, the fact you looked at my wares at all is good enough for me
|
|
|
jambojeef
|
| posted on 25/8/08 at 03:50 PM |
|
|
Jacket and Trousers Sold
|
|
|
jambojeef
|
| posted on 25/8/08 at 04:02 PM |
|
|
It just keeps coming -
Haynes CVH Tuning Manual, as new - i didnt tune my fiesta in the end - I crashed it - much cheaper...
Build your own Tiger Avon Book - yes I know its not a locost - helped me when I began my build and would help you too if you're building
from scratch or even building a tiger avon! Bits about welding and GRP bodywork etc etc
£Make me an offer should you be in the market for such stimulating reading material
 
Rescued attachment DSCN0105.JPG
|
|
|
jambojeef
|
| posted on 25/8/08 at 04:03 PM |
|
|
CVH
 
Rescued attachment DSCN0106.JPG
|
|
|
Antnicuk
|
| posted on 25/8/08 at 08:25 PM |
|
|
dibs on the oil pressure switch, how do you want payment?
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
jambojeef
|
| posted on 25/8/08 at 08:44 PM |
|
|
U2U sent - thankyou!
|
|
|
MK chippy
|
| posted on 28/8/08 at 11:49 AM |
|
|
U2U mate about the haynes.
Cheers
Dave
|
|
|
dhutch
|
| posted on 3/9/08 at 10:20 PM |
|
|
U2U for CVH Book
|
|
|
