fullpint
|
| posted on 7/7/12 at 09:04 AM |
|
|
ABAC B5924 5.5HP 3 phase compressor
Purchased new in May 2010. No longer required due to the purchase of a lovely new screw compressor. Currently this is not wired up but can be if you
want to see/hear it working. Looking for offers over £400. I had it serviced in Feb 2012. Use in my small workshop to run my blaster and powder
coating unit.
One owner from new, low mileage and a FSH
Here's some tech stuff. Compressor currently stored at SN12 near Melksham.
Abac 5.5 HP 415 volt V Belt Drive Air Compressor Mounted on a 200 Litre Receiver ideal for garage workshops.
Model Number B5924/200
Abac lubricated compressors come with cast iron cylinders for long life and the slow running pump unit gives low noise and long durability. Slow
running belt drive for smooth efficient operation.
Features:-
•5.5 HP Motor
•415 volt three phase supply
•200 Litre Air Receiver –
•Piston Displacement: 24 cfm
•Free Air Delivered (FAD): 17.7cfm
•Pressure: 10bar 145psi
•Low speed pump
•Cast Iron Cylinder
•Control: auto stop/start
•Weight: 133 kg
•Overall size mm: 1400X495X1010 mm:
 
Description
 
Description
[img]http://[/img]
[Edited on 8/7/12 by fullpint]
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
fullpint
|
| posted on 8/7/12 at 06:31 PM |
|
|
Pic's added. Can email more if req'd.. Just u2u your email.. Cheers; Steve
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|
|
fullpint
|
| posted on 14/7/12 at 05:28 AM |
|
|
Open to a deal on a swap!! WHY? 13" wheels for my Indy, a nice SLR camera, a new wife  Super-mono,
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|
|
fullpint
|
| posted on 19/7/12 at 12:59 PM |
|
|
Will be going on fleabay at the weekend and hopefully will go for £500+... You just never can tell
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|
|
fullpint
|
| posted on 22/7/12 at 06:55 PM |
|
|
Now on EBay for those who fancy a bid or two....
ABAC 415V Compressor 200lt tank 3 phase 5.5HP | eBay
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|
|
billy
|
| posted on 22/7/12 at 08:17 PM |
|
|
I have a nice set of minilite 13" wheels with cr500 tyres, hardly used and came off a caterham, if you wanna do a deal?
luego-lo-cost finished,vauxhall 16v 2.0,twin 45s de-dion rear set up
|
|
|
fullpint
|
| posted on 23/7/12 at 04:57 AM |
|
|
Could be.. Will send you a u2u for pic's, my email is tpcs2010@live.com
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|
|
fullpint
|
| posted on 2/8/12 at 07:40 AM |
|
|
SOLD SOLD... Went for a mere £360 and gone to a trader.. Someone missed out on a good deal here. Never mind.
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|
|
