McLannahan
|
posted on 25/4/10 at 05:21 PM |
|
|
Various KC bits - can take to Stoney
Evening all - I'm having a clearout and trying to make some space in the shed and garage!
I'm going to Stoneleigh for the whole weekend (Sat, Sun and Monday) so I'm happy to take anything available to there - rather that than
postage to be honest!
Westfield 14 " Alloys.
Very little curbing and includes caps and security bolts/key.
They have started to corrode under the lacquer. Nothing a quick sand wouldn't sort.
Tyres are not great but not slick yet but they're not really road legal.
Image deleted by owner
Image deleted by owner
More photos available in my Photo Archive
Alloys - I would like £40 for these please!
Potentially sold - Mountney steering wheel - 30cm dia.
It's leather and includes the horn push. It came from a MK2 Escort column but may well fit others?
Image deleted by owner
Image deleted by owner
Potentially sold - Wheel - I'd like £7.50 for this please!
Exhaust trim - Bought new from Stoney a few years back and never used! It has an entrance of 50mm dia and it's about 200mm long.
Image deleted by owner
Potentially sold - Exhaust trim - I'd like £4 for this please!
Bonnet catches - Removed these from my old classic style Fury bonnet but they'd suit many cars. They're in quite good condition and work
well.
Potentially sold - Catches - I'd like £10 for these please!
Indicators - These are the standard affair normally found on Land Rovers and the sort. They've got clear lenses fitted and orange bulbs (not
tested the bulbs in a while)
Potentially sold - Indies - I'd like £5 for the pair please!
More to follow....
[Edited on 26/4/10 by McLannahan]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
emsfactory
|
posted on 25/4/10 at 05:41 PM |
|
|
u2u
|
|
McLannahan
|
posted on 25/4/10 at 05:42 PM |
|
|
Part 2!
Ford Escort Haynes manual. Mk2 so 68 to 74.
In good order!
Haynes Escort mk2
Haynes - I'd like £4 for this please!
Petrol cap - Again removed from my old Fury. Chrome plated as catches. It's spring loaded but has no locking mechanism.
It's about 90mm diameter and has a 44mm intake.
It's in ok condition - a few "dots" on the chrome but perfectly useable.
Image deleted by owner
Potentially sold - Fuel cap - I'd like £5 for this please!
Ally tube - I've no idea why I have this. It might have a use for someone?
6 x 305mm 18mm outside and 12mm inside. 3mm walls.
Ally tube
Potentially sold - Tubes - £2 please!
Honda Blackbird fuel sender - Some very kind chap sent this to me free from LCB but I can't remember who. I've never fitted it myself so
unsure if it works but I'm sure it will - nothing as such to go wrong!
Image deleted by owner
Potentially sold - In the spirit it was sent to me - Free!
Fury parts - I have a rear roll bar and a trailing arm too. Both quite useable.
Fury Arms
Fury parts - £5 for both please!
Fireblade airbox with K&N fitted - This includes the carb rubbers too. I believe this came from a 919.
In good condition and handy to have the rubbers and filter fitted too!
Fireblade with K and N rubbers
Airbox- I'd like £25 for this please!
Brand new -
I bought this from Andy Bates back last year but didn't ever fit either. It's still brand new and as it arrived to me.
Barnett clutch springs MT99. Fit a Blade 919 and others too.
Image deleted by owner
Potentially sold - Springs - I'd like £15 for the springs please
Baffle plate.
This is an Andy special and well worth doing to your Blade. As stated - unused and as new. This was for my 1997 919 Blade.
Image deleted by owner
Potentially sold - Baffle plate - I'd like £25 for this please!
Have some MX5 parts but will probably shove those on EBay.
Feel free to u2 if interested in anything. I'm happy to take any of it to Stoneleigh next weekend.
Cheers all
Michael
[Edited on 26/4/10 by McLannahan]
|
|
adithorp
|
posted on 25/4/10 at 05:54 PM |
|
|
I'll tak the exhaust trim off your hands if it's still available. I'll be at Stoneleigh.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
speedyxjs
|
posted on 25/4/10 at 06:01 PM |
|
|
u2u re fuel cap!
How long can i resist the temptation to drop a V8 in?
|
|
Snuggs
|
posted on 25/4/10 at 06:08 PM |
|
|
I will take the catches please.
I will be at Stoneleigh all weekend
----------------------------------------------------------------------------------------------------
http://www.topcashback.co.uk/ref/snuggstcb
Spider pig, spider pig, does whatever a spider pig does.
I doubt therefore I may be.
Luposlipophobia : Fear of being chased by wolves around a freshly waxed kitchen floor, while wearing only socks on your feet.
My mind not only wanders, sometimes it leaves completely!
http://www.venganza.org
http://www.jesusandmo.net/
http://www.snuggs.co.uk
|
|
YQUSTA
|
posted on 25/4/10 at 06:09 PM |
|
|
I'll take the sender.
I will be at stoneleigh on sunday.
"If in doubt flat out"
Colin McRae
|
|
McLannahan
|
posted on 25/4/10 at 06:23 PM |
|
|
Catches and indies may have gone to EMS I'm afraid?
JQ - That's fine.
Snuggs - Catches may have gone I'm afraid?
Speedy - U2 returned.
Adi - It's yours. See you there!
|
|
coozer
|
posted on 25/4/10 at 08:23 PM |
|
|
I'll take the indicators and ali tubes. I'm coming all weekend too, look out for Bumper the crash damaged MNR
Rescued attachment P1000091.jpg
1972 V8 Jago
1980 Z750
|
|
v8james
|
posted on 26/4/10 at 09:41 AM |
|
|
U2U send about Mountney steering wheel
|
|
carpmart
|
posted on 26/4/10 at 12:39 PM |
|
|
Hi Michael
Hope your well?
I'll take the baffle plate, the spings if uprated from standard (?) and the tubes please.
I'm at Stonleigh on Sunday so can collect then!
Thanks
Harvey
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
McLannahan
|
posted on 26/4/10 at 06:50 PM |
|
|
Bumpo!
Wheels still available - £40 please
Airbox still available - £25 please
Fury parts still available - £5 for both please
Haynes still available - £4 please
Do u2 if you're interested - as I'd love to take it all to Stoney to get a decent start on my clearout!
Barnett springs - Gone
Baffle plate - Gone
Catches - Gone
Indies - Gone
Ali - Gone
Steering wheel - Gone
Fuel sender - Gone
Petrol cap - Gone
Exhaust trim - Gone
Thanks everyone for your interest. Those people who are collecting from me at Stoney should have a U2 with my mombile to give me a bell!
Cheers
Michael
Updated - Fuel cap sold
[Edited on 26/4/10 by McLannahan]
|
|
McLannahan
|
posted on 27/4/10 at 07:54 PM |
|
|
Bump for the bits?
Open to offers on the remaining goods chaps/chapesseseseses?
|
|
McLannahan
|
posted on 30/4/10 at 08:41 PM |
|
|
Bump again!!
Throwing bits in the car tomorrow and would dearly love to say goodbye to the wheels....cough hint....
|
|
stevebubs
|
posted on 30/4/10 at 08:49 PM |
|
|
Let me know if the catches are still going - will save me filling in the holes!!
|
|
McLannahan
|
posted on 1/5/10 at 11:12 AM |
|
|
quote: Originally posted by stevebubs
Let me know if the catches are still going - will save me filling in the holes!!
Sorry Steve - They went really quickly and were posted.
Sorry too I didn't think of you...forgot you still had the bonnet!!
|
|
bigdrew
|
posted on 1/5/10 at 07:10 PM |
|
|
Do you know the offset and width of the wheels?
|
|
stevebubs
|
posted on 1/5/10 at 07:19 PM |
|
|
quote: Originally posted by McLannahan
quote: Originally posted by stevebubs
Let me know if the catches are still going - will save me filling in the holes!!
Sorry Steve - They went really quickly and were posted.
Sorry too I didn't think of you...forgot you still had the bonnet!!
Don't suppose you know where they were from originally?
|
|
McLannahan
|
posted on 3/5/10 at 07:51 PM |
|
|
Thanks to all who I met up with and nice to have met you all!
Wheels went I'm afraid to a Westfield owning chap. He had a set of four and wanted 5. Made up with them he was!
I'm happy to post the remainders if people are interested or collection is welcome?
Airbox still available
Fury parts still available
Haynes still available
and Steve....Sorry I don't! Have been mailed off now but EMSFactory (Cameron) may be able to get some details of them?
Cheers
|
|