Board logo

Speedo & Tacho
jeffw - 12/7/08 at 08:39 AM

Smiths Speedo and Tacho for sale. Black face, mechanical speedo which has been used on a Type 9 gearbox on a Zetec and seemed to read correctly. Tacho is electronic. Items are 10years (ish) old and I have just replaced them with a Vapor on my Phoenix.

Open to offers, the items are in Kent. I can take photos if there is any interest.
Also have a matching water temp gauge if required.


Stuart_B - 12/7/08 at 02:30 PM

hi, could you take a few pictures of them, would the tacho work on a pinto with the amplifer thing it got?

thanks

stuart


jeffw - 14/7/08 at 05:31 AM

Hi Stuart

I'll try and get photos tonight. I assume it will work with a Pinto but I can't guarentee it...


jeffw - 14/7/08 at 07:52 PM

Picture as requested Rescued attachment IMG_2128.jpg
Rescued attachment IMG_2128.jpg


jeffw - 19/7/08 at 05:41 AM

No one want them?....open to offers


dogwood - 19/7/08 at 07:15 AM

Hi Ya

U2U sent

David


Mk1_Mark - 22/7/08 at 06:26 PM

Does the tacho work on a zetec, wasted spark and how much posted?

Thanks, Mark


jeffw - 23/7/08 at 05:48 AM

Tacho certainly works with a Zetec and I assume that it will work with wasted spark. I cannot obviously say for certain without having tried it on your set-up.

Not sure on Postage but I guess it will be around £8-10 for UK mail.

[Edited on 23/7/08 by jeffw]


Mk1_Mark - 30/7/08 at 09:44 PM

when i say wasted spark i mean normal zetec coil pack and it reads correctly?

how much are you looking for it? postage with royal mail prob be about 4 quid


jeffw - 31/7/08 at 07:29 PM

It does read correctly on a normal Zetec coil pack....

The Speedo is now Sold.


Macbeast - 31/7/08 at 10:56 PM

If tacho is still available, what diameter pls ?


jeffw - 1/8/08 at 02:20 AM

Big size (80mm) rather than 52mm for the normal gauges.


Macbeast - 1/8/08 at 06:01 AM

No good then, sorry, mine are 100 mm.


jeffw - 1/8/08 at 11:40 AM

I'll check this evening just to be sure.


jeffw - 2/8/08 at 07:08 PM

80mm is what it measures


Macbeast - 2/8/08 at 09:09 PM

TY for checking. Good luck