Board logo

FS: 3 sets of wheel nuts (shiny, weathered and ally)
hobbsy - 31/3/08 at 05:37 PM

M12 x 1.5mm pitch, tapered.

One set is nice and shiny and hardly used (x16)

Another set is same design but a bit weathered (x16)

These two sets have closed ends so if your studs are very long (like mine - to allow for spacers) they might not fit.


Final set are aluminium and are anodised black, they are about 40mm long (longer than the other ones) and have open ends. I bought 2 different "lengths" of these and the shorter ones were long enough. I think I have 20 of these.

Shiny set is £12 plus £8 post.

Weathered set is £7 plus £8 post.

Ally sets are £15 plus £5 post (cost about £25 to £30).

Or near offer.

Shiny set: Rescued attachment 16x m12x1.5 nuts - shiny.jpg
Rescued attachment 16x m12x1.5 nuts - shiny.jpg


hobbsy - 31/3/08 at 05:39 PM

Weathered set Rescued attachment 16x m12x1.5 nuts.jpg
Rescued attachment 16x m12x1.5 nuts.jpg


hobbsy - 31/3/08 at 05:42 PM

Ally ones are like this but about 10mm longer. Rescued attachment ally nuts.jpg
Rescued attachment ally nuts.jpg


CRAIGR - 31/3/08 at 06:08 PM

2nd dibs on the ally ones if sale falls through


hobbsy - 31/3/08 at 06:51 PM

Ally set provisionally sold.