I have decided to advertise my Sylva Mojo kit car project. It is in a part built state, with most of the boring stuff already done! The complete list of everything inlcuded in the sale can be seen in the attached image, showing a breakdown of the various parts and costs (I have receipts for pretty much everything).
Almost everything fitted is either new, or reconditioned to an "as new" state. The car is basically a rolling chassis, with the majority of the panels attached, and if not, cut to shape/size and drilled ready for riveting on. The suspension is built, assembled, wheels fitted, brakes fitted (just need bleeding) fuel tank and lines fitted etc. The engine is ready to be fitted to the car (and will be done this weekend if the new mounting bolts arrive!), and just needs the coolant pipes ordering/fitting. The inlet manifold is inlcuded, but I am not sure if it is going to fit under the engine cover. I was planning to fit it if possible, and use the standard toyota throttle butterfly. If it doesnt fit under the engine cover, my back up solution was to go with a set of motor bike throttle bodies, and use the toyota injectors on a custom inlet manifold. The toyota exhaust manifold is included, although I was planning to get a custom stainless exhaust system made up.
All work on the car has been completed to a high standard (I'm an engineer by trade!). For more information on the build, see my build diary here: http://mysite.wanadoo-members.co.uk/lordandy/Sirwebsite/kitcar/build_diary.htm (there has been very little progress since the last update, other than the engine has been worked on where needed).
At present I am finding it very difficult to find the time to make any progress on the car, and my work commitments are going to get bigger in the forthcoming year, and I just cannot see me getting enough time to finish the car this decade (which depresses me!). This is why I have decided to see if anyone is interested in purchasing the project as it stands. I am open to sensible offers on the project, and you are welcome to come and have a look (I'm based in Abergele, North Wales). Please give me a shout if you are interested, or want more information etc.
Cheers
Andy
PS. I would consider a part exhange for a VW transporter van too
Rescued attachment kitcar costs.JPG