Board logo

FS: Chapman bodywork & 8 X 6jjx13 minilites with mixed tyres
mark chandler - 25/10/15 at 12:39 PM

Hello, I,m after £500 for this lot collected.

Bodywork as per this photo:

In the garage
In the garage


Will need freshening up with paint

Front wings and stays to fit cortina uprights
Fibreglass nose cone
Ali bonnet and Ali bulkhead
Rear wings
The side panels are riveted on as is the rear panel, these may not come off neatly but you are welcome to them

Wheels
All ford PCD
4 X genuine minilites, laquer is tatty (fit over wil wood calipers etc)
1 pair fitted with new Yokohama a539's these tyres were new in 2 years ago and have covered 50 miles only.
Other pair fitted with michlin slicks, 16/53/13 plenty of life left but old and dried out (they are still great for track days once warm)

4 X minator minilite copies, good condition (fit over Sierra rear brakes)
1 pair fitted with fulda 205/60/13's, old but with good tread
Other pair fitted with slicks as above, also some 2 X Yoko 048's, just legal thrown in.

They are all et24, standard caterham fit which is where they originally lived, so you have a set of MOT/commute/wet tyres and a set of slicks for the track

Collection from my house in Tadley.

Reason for sale, I am fitting an old fury body to the car and moving to 7" wheels.

Regards Mark

[Edited on 25/10/15 by mark chandler]

[Edited on 25/10/15 by mark chandler]


KevinS - 31/10/15 at 10:21 AM

Hello Mark, would you consider splitting? I am after 4 x 13" wheels.

regards

Kevin


mark chandler - 31/10/15 at 11:42 AM

Hello Kevin

I will be posting the wheels on eBay next week anyway so splitting is fine.

One set will be £160, the scruffy ones the other £200, collected!

My post code is rg26 3sx


Regards Mark


KevinS - 31/10/15 at 11:55 AM

Hi Mark

I am interested in one or other set depending on condition. Would be happy to drive over with cash to pick which set.

Is there a means of emailing you direct to swap numbers / address details or alternatively please email me


thanks

Kevin

[Edited on 31/10/15 by KevinS]

[Edited on 2/11/15 by KevinS]