Couple of bits still for sale;

1) Duratec inlet manifold plate. This is originally from DanST Engineering and is new and unused. £10 including delivery (or £5 collected)





2) 4 off Honda CBR1100XX Blackbird Injectors. These have been fully serviced with new o-ring etc and tested and all work 100% as new. They are good for 300cc/min @ 43psi (test results to prove) so 250bhp+ should be no problem. It cost me £50 just to get them cleaned and tested so I think £65 collected or £75 delivered by UPS is a good price?


Injectors


Test data


Any questions then U2U me