now started my new project.

initial stages are stripping, cleaning, and selling all the parts I don't need.





First off are the rear clam, engine covers and wing mirrors.

All in sparkling Ruby Red and paintwork is in generally exceptional condition. It would benefit from a polish but there are very few stone chips, and the rear clam has the clear armour fend protection in the usual places. Apart from the odd scratch I haven't been able to find any damage on the clam. The engine cover is in perfect condition. The mirrors have a scuff on one and stonechip on the other. I only have the branched support for one of the mirrors.

I also have the plastic interior trim parts.



many more pictures here:
https://www.facebook.com/patroclueus/media_set?set=a.672425035516.1073741836.283500024&type=1&l=b447773fae

Wiring shown in the clam pictures will be removed as I need this...

Rear Clam - £250 ono - collection only LE10
Engine cover £50 - collection only LE10
Wing mirrors £20
Interior Trim £20

in the near future I will have more: full soft top in excellent condition, wheels, tyres, brakes, suspension components, a fully running 1.8k Series engine & box with 87k miles only, ECU, engine loom, seats (maybe), steering wheel... PM me if you are after anything in particular.

cheers
Pat

Pedals??

What side and condition of threads on the mirror branch that you do have. Paint would be unimportant.

quote:

---

Originally posted by ian.stewart
Pedals??

---

quote:

---

Originally posted by loggyboy
What side and condition of threads on the mirror branch that you do have. Paint would be unimportant.

---

Dont worry if the threads are damaged as thats why we are looking to replace. Thanks.

wheels are in fantastic condition. No kerbing on any of them.



sizes are 15" front 16" rear.

Tyres are
Pirelli P6000 185/55/R15 fronts (~5.7mm)
Pirelli P6000 205/50/r16 rears (~2.4mm)

wheels not available immediately as I need them to wheel the car about on for around another week to 10 days... when they are: £320 with tyres, £240 without tyres - collection from LE10

Passenger seat:

more seat pics:
https://www.facebook.com/media/set/?set=a.672425035516.1073741836.283500024&type=1&l=b447773fae

Leather covered, padded lumber support. Leather is in excellent condition with only some tiny, tiny marks that I have tried to picture above. Mounting subframe included (subframe could do with a lick of paint). Weight is 8.4kg including the subframe. £125 collection LE10


Driver's side seat available shortly, only slightly more worn and has the added bonus of the lumbar support being adjustable with a very neat hand pump (pics later or tomorrow)

cheers,

Description
Description
Description
M10 x 1.5 threaded internally. £5 posted

2x Alpine 6.5" speakers (OEM factory fitment) £10 posted




Very nice aluminium hinge from the engine cover - only 290 grams! £12 posted.


hinge front the front radiator cover will also be available (not pictured yet) - £12 posted

Driver & Passenger inertia reel seatbelts in excellent condition, complete will all bolts and plastic trim covers. These would be ideal for some sort of locost build as they are not excessively long like most donor car belts and simple to mount (can provide pics on request) £10 posted each

[Edited on 27/4/14 by Pat_T]

GEARKNOB SOLD.

Roof and rear window glass:



Rear window glass, very good condition. Glass is perfect. Rubber seal is complete but could do with re-sticking in a few places with some black sikaflex. £45 collected or £60 posted



Full black OEM soft top roof assembly, in black with white highlight stitching, in very good condition. With carry bag. More roof pictures added to original link. £125 collected or £150 posted.

soft top sold.





passenger footrest, this would look great in a locost! £24 posted or can take to Stoneleigh where you can have it for £20 cash.

Rear clamshell on ebay bargain starting price £100!!
eBay Item

Engine hatch on ebay bargain starting price £25!!
eBay Item

[Edited on 2/5/14 by Pat_T]

U2U sent footrest

pics of the driver's seat now available.
driver's won't come with subframe but does some with a nifty lumbar support pump which works very well.

They are only 431mm wide at the base. They would have definitely fitted into my old Stuart Taylor locost.
488mm wide at shoulders.

If you PM me beforehand I can take the pair of seats to Stoneleigh on Monday morning - I will be there 10am-12am

£215 for the pair











rear clam sold
footrest sold

seats now on ebay as a pair. 99p start, no reserve! get yourself a bargain

eBay Item

will start stripping the front end of the car later this week, front fogs will definitely be available...

steering wheel will also be available (once I work out how to remove it!!)

Hey,

Does the car have clear front indicators? If so, what's the condition and what's your price??


Rob

sorry mate they're amber not clear

No worries. Thanks for the reply. Looking for a pair for the rear of mine.

How come your breaking yours? I love mine!

Rob

only partially breaking - turning it into a 400bhp Exige if all goes to plan

What engine you going to put in it?

front foglights now removed. 100mm diameter, easy to mount, with bulbs. Small crack in one lense, one unit has one of the four mounting tabs snapped off but should be easy to securely mount with three. Otherwise excellent condition. Will get more pics... - £22 posted


front grill - £7 posted

standard 1.8 k-series airbox assembly with new air filter - £18 posted

standard EVAP can assembly & hoses with purge valve - £5 collection only (due to length of non-bendable hoses)

front numberplate plinth - £9 posted



just ask if you want pics of any of this stuff!

fog lights, front grill, numberplate plinth sold.

any takers for a full 1.8 K-Series engine in excellent condition? 87k miles. ECU available too..

rear glass still available, this would be ideal for some sort of middy locost I think?

wheels will be coming off the car around 10th June.

U2u sent

rear windscreen now on ebay. 99p start no reserve!!

eBay Item

airbox on ebay: eBay Item

comes with nice aluminium mounting bracket that might be useful for a locoster...

The Elise had the PRT kit fitted, but I won't need a thermostat for the new engine.

So available for sale, quite a tidy piece. You can use this to replace an internal thermostat and help reduce warm-up times. They also probably suffer from less leakage than internally housed thermostats. All hose spigot ODs are 35mm. Weight is only 256grams





£20 posted

Hey,

Does that fit the standard system? How does it work? What are the advantages of using it, apart from reduced warm up times?


Rob

quote:

---

Originally posted by b14wrc
Does that fit the standard system? How does it work? What are the advantages of using it, apart from reduced warm up times?

---

thermostat now on ebay at 99p/no reserve - get yourself a bargain:

eBay Item


cheers

engine now gone.

standard K-series Rover ECU - £15 posted

listed here on MLOC:

http://www.midlandslotus.co.uk/forum/classifieds/item/507-wheels-tyres-recently-refurbished/

but would consider decent offers?

thermostat sold.

heater matrix - could be ideal for a kit car? EBAY 99p start no reserve!
S1 Lotus Elise Exige heater matrix &' hoses (Genuine OE Parts).

nearside mudflap
S1 Lotus Elise Exige front nearside mudflap (Genuine OE Part).


wheels & tyres available - need these gone ASAP as taking up room now they're off the car. Would take £250 from a locostbuilder!!!

wheels and tyres now on ebay - no reserve and need to get rid of these!!!

http://cgi.ebay.co.uk/301220217757

Front brakes - AP Racing twin pot calipers, 282mm discs, pads and hoses all for sale. The discs and pads are pretty much brand new - around 100 miles on only!

£250 posted for the lot. Be quick these will go very fast

cheers

here's pictures:

did you replace the disks or just the pads 100 miles ago? The disks look like they are MMC check them with a magnet. If they are MMC some one on seloc will been keen to get hold of them.

[Edited on 24/6/14 by ceebmoj]

both, but they are just standard steel discs...

S1 Elise Koni Dampers with Eibach springs. Fully functional but could maybe do with the springs removing and repainting/powdercoating for a cosmetic tidy up. If it was me I'd fit new bumpstops at the same time but apart from that they are ready to go back on! No leaks from any of the dampers, no cracks on the springs. These were purchased as a full car set and have an August 2009 manufacture date. Estimate 4 years and 20,000 miles on them.

£110 for the set collected from LE10 or plus £12 for UK postage















£100 for the set collected from LE10 or plus £12 for UK postage

S1 Lotus Elise Exige front brake calipers, hoses, discs &' pads (nearly new!)

S1 Lotus Elise Exige Genuine Koni Shock absorbers with Eibach Springs

thanks

on ebay: 99p start, no reserve!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=301229682026



cheers

me again

Steering wheel.






Standard factory Elise wheel. 310mm outer diameter. Nice and lightweight. No boss or horn centre button included but steel base section looks easy to mount off for a locost project. Centre section is removable.
£17 posted

Anti Roll Bar clamping mounts.



2x Elise front anti roll bar clamps. These are nice extruded aluminium pieces that would be ideal for a Seven build (front or rear). You could use the standard Elise bushes and have your own bar fabricated to suit.
£15 posted

cheers

steering wheel sold.

Anti Roll bar clamps on ebay - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=301305892048 - 99p start, no reserve!

Fuel pump and driveshafts/CV joints available soon. Possibly a full set of aluminium uprights too!


cheers

STACK instruments/all-in-one dash:


Description



Description





These do everything in the one unit as you can see. Speed, revs, warning lights, headlights, indicators, fuel level, coolant temp, odometer, handbrake, engine check light.

I believe they are getting pretty rare now so I will be taking offers on this for a few days before I set a price! Post here or U2U me.

----------------------------

AP Racing Clutch slave cylinder:

Description

Description

Description

Perfect working order, however split in the rubber boot as pictured. Can probably buy replacement boot separately. Nice and lightweight option for any FWD derived lever operated clutches in middy locosts?

£13 posted

cheers

Dash sold instantly.

Offers on the slave cylinder before it goes on ebay?

Any interest in the aluminium uprights? not too sure what they are worth at the moment.

Will also have the fuel pump, and possibly the fuel tank for sale soon...

K-series engine mount - £22 posted

Description

Description

Description

standard S1 Elise radiator and fan available, can sort pics on request

core = 600 x 300 x 33mm
overall = 680 x 340 x 80mm (inc fan)

spigots = 30mm ID
fan = 300mm diameter


Description
Description
Description
Description
Description
Description
Description

tiny bit of delamination on the fins in one corner but the rad doesn't leak and is structurally fine.

£32 posted

offers for the rad & fan before it goes in the bin? (collection preferred)

still got the clutch slave cylinder.

soon will have full set of aluminium uprights, and possibly the steering rack too...

Should be suitable for any Middy with a FWD derived gearbox. Nice and light (around 2.0kg everything you see)

open to sensible offers. collection preffered LE10

cheers

aluminium footwell divider

comes with footrest for clutch foot.

only 699grams.

£28+postage or collection from LE10

Any idea on price for dash?

[Edited on 13/1/15 by theduck]

For some reason I can't see the photos of the gear change stuff - might be an iPad issue...otherwise might be interested if I can see it!

quote:

---

Originally posted by JC
For some reason I can't see the photos of the gear change stuff - might be an iPad issue...otherwise might be interested if I can see it!

---

quote:

---

Originally posted by theduck
Any idea on price for dash?

[Edited on 13/1/15 by theduck]

---

Re-host images of the gear linkage stuff:














The linkage mechanism in the first few pictures sits ontop of the zinc-plated housing in the later images. The housing can simply bolt to any flat surface.


Footwell divider pics:

divider sold.

gear linkage on ebay: eBay Item 99p start, no reserve!


complete operational handbrake mechanism available including cables - would suit any locost build, traditional or middy! zinc plated. includes switch for warning light


Description
Description
Description
Description

nice and lightweight only 1083g (plus cables - not pictured) £20 posted

front uprights now on Ebay - item# 301530877630

Pair of genuine Lotus Elise Exige S1 Aluminium front uprights (refurbished)

£0.99 start, no reserve!!


Description


Gear linkage stuff sold.

cheers

Not much left now.

Rear uprights will be available... currently I can't get the rear hub nuts undone to separate them from the driveshafts which will also be available.

Still open to offers on the handbrake mechanism.

Indicator/brake light covers.

Steering rack - this would be ideal for any locost build I should think. £45 posted. Pics once I have removed it from the tub...

Genuine Lotus Elise S1 Front clam &' Bonnet (Ruby Red)

open to sensible offers