Hi all
After buying Andy Reeve's haynes roadster i know have a bucket load of gear to sell. So the first lot is as follows.
Twin dellorto DHLA40 carbs mounted on a caterham short xflow manifold. I also fitted brand new short trumpets and new k&n filters however the
filter tops have got a little marked while in storage. These were briefly on my 1660cc crossflow and they ran fine however i believe they were jetted
for a 1700cc, although the best bet would be to have them on a rolling road for fine tuning. All gaskets and diaphragms were changed when i got them.
Asking £350.00 posted ono
Weber DGAV32 twin choke carb mounted on a standard xflow manifold complete with a k&n filter, filter case has a few marks from storage. Again, I
replaced all the gaskets etc. Asking £70.00 posted ono.
Brand new polo rad never fitted plus brand new 10" push/pull fan and fitting kit. Asking £40.00 posted ono.
Pair of 53/4" classic headlamp unit in black satin (E10 marked) Slight marks on the back but all in all very good condition Asking £60 posted
ono.
Brand new 0.750" Master cylinder kit c/w two interchangeable reservoirs suitable for remote fixing if required, also IVA ok float switch cap and
all fittings. Asking £30 posted ono.
I'm open to offers on these guys, if they don't sell I'll be banging them on the bay of e. I've also got a bucket load of other
stuff including a 2.0 zetec, good spec crossflow engine package and gearbox, type 9 box, sierra donor parts, ron champion chassis, body work, seats
and a stack more. I'll post info on the other stuff asap but if there is anything you may need then give me a shout.
Just noticed that we still appear to have a problem with images and the ott locost builder logo! so if you would like some pics then please u2u me
with an email address and I'll forward some pics onto you.
Thanks for Looking
Cheers
Leon
Description
Description
Description
Description
Description
Description
Description
Description
Description
Hi Leon
I'll take the rad and fan please, I only live just up at Thirsk so could collect if you're in York?
Ps You don't have a diff by anychance do you?
Hi Marco
Great stuff. I do have a sierra diff with push in shafts, not sure what the ratio is though to be honest but if you wanted to bob down to York then by
all means we can take the cover plate of and have a butchers. All this stuff is at my Unit on Hessay Industrial estate (Just off the A59 so not quite
in York)
Cheers
Leon
I'll take the master cylinder and the rad if ^ changes his mind
Cheers
Pete
No probs Pete
Cheers
Leon
quote:
Originally posted by leon51274
Hi Marco
Great stuff. I do have a sierra diff with push in shafts, not sure what the ratio is though to be honest but if you wanted to bob down to York then by all means we can take the cover plate of and have a butchers. All this stuff is at my Unit on Hessay Industrial estate (Just off the A59 so not quite in York)
Cheers
Leon
Hi leon,
I may be interested in the type 9 gearbox, u2u me with your thoughts on price.
I am based in Selby so no probs with pickup.
Regards, Denis.
Just managed to look at the image full size, can the master cylinder operate both the front and rear brakes with seperate circuits? Or is it one designed to go with another and one of those bias bars? Will it be IVA acceptable by itself?
you have u2u
Rad and fan gone
Master cylinder gone
Bump on the rest guys and girls
Intrested in the lights, can you post a pic on here of them? I have lhd lights and only want to swap the lens If there the same as mine
I'm localish too so could collect
u2u sent
Headlights gone. Carbs now on ebay. Bucket load of other stuff to get rid of guys so if you need anything give me a shout, I'll list the other stuff next week.