I am putting up my bike engined Clan Crusader for sale due to the arrival of another project. The car is a MINT 1974 shell in Yellow fitted with a fireblade engine. Engine, gears, exhaust, brakes, suspension etc are all fitted and all wiring to run engine is complete. All that remains to do is fit fuel lines and cooling system and replace trim bits such as dashboard, windscreen etc. This really is a VERY simple project to complete and ALL parts are there to finish. This will make a fantastic car when finished. I am looking for £3750 for the lot. U2U me for pics and more details or call 07861 996703.

Also 2 sets of 185/60/13 track tyres with very little use. 1 set Toyo 888 , 1 set Yoko 048s 200 ono per set.

Cheers


[Edited on 1/6/11 by Parky]

[Edited on 1/6/11 by Parky]
[img]http://www.locostbuilders.co.uk/photos.php?action=gal&user=Parky&folder=root[/img]

[Edited on 1/6/11 by Parky]

A picture tells a thousand words....

Nice...

I wish you hadn't put this up, just what I need right now - another project in the workshop....

I love these cars, here's me doing a Sprint a while back:

http://www.youtube.com/watch?v=uWoLpDMZFts

OK, I'll be in touch, you'll find a U2U asking for pictures. Please tempt me.....

another famous Clan sprint/hillclimb car, Eric Morreys turbo'd and megasquirted version on slicks

http://www.hillclimbandsprint.co.uk/gallery/Gallery47/ERIC%20MORREY.JPG


[Edited on 3/6/11 by CNHSS1]

One set of tyres now sold. Others still available. Quite a bit of interest in Clan. First one to view it WILL buy it!

Car will probably present at Newark Kit Show on Sunday for viewing. Call me on 07861 996703 for more details.

Tyres now sold! Still got this liitle beauty though!

Ok , looks like it's EBAY bound. Watch out for it over the next few days. Clans are making good money on EBAY at the moment , even poor examples( Have a look on EBAY right now!) , so I expect this to do well!

quote:

---

Originally posted by motorcycle_mayhem
I wish you hadn't put this up, just what I need right now - another project in the workshop....

I love these cars, here's me doing a Sprint a while back:

http://www.youtube.com/watch?v=uWoLpDMZFts

OK, I'll be in touch, you'll find a U2U asking for pictures. Please tempt me.....

---

My mate Graham is progressing with the build of his two.
A race car and a rally car.
No engines in yet or suspension set up, so they're sitting a tad high shall we say.

If anyone in the NE happens to be at Washington tomorrow for the Clan 40th event, they'll be there along with another pal's blackbird powered hillclimb car.


[img]
Race and rally [/img]


[img]
Clan roll cage [/img]

Forgot to add.

Best of luck with the sale and have a free bump !

[Edited on 3/7/11 by zilspeed]

my mate tony grundys clan hes from bonnybridge .

http://en.wikipedia.org/wiki/File:1972-Clan_Crusader.JPG

quote:

---

Originally posted by thunderace
my mate tony grundys clan hes from bonnybridge .

http://en.wikipedia.org/wiki/File:1972-Clan_Crusader.JPG

---

It was a very carefully built angle grinder though.... 1040cc, R23 cam, worked crank/head, etc., etc., fed via a pair of 45 DHLAs. Red pipes you see are to the front radiator, nothing in the back except engine. The rattle on pull off is from the clutch ( a heavily modified twin plate) and release mechansm.
What no-one notices from the video (unless they're an Impist) is that I select *reverse* gear to pull away.....
It's a specially built S/C 5 Speed! (space was machined in the casing where reverse used to be). The clank is the QM plate differential.

No, it didn't roll, despite the antique swinging arm suspension. In all, one of the most fun cars I've ever had.
No match (now) for the BEC's, but at the time, I held many 1400cc circuit records.

Great car, great era.

I now have BECs, but always have had a passion for putting a GSXR in a Clan, just not enough life to do all this when you're competing. When I hit 50, life ends, and I hang up my helmet and spend my incontinent days eating liquidised food, then I'll perhaps have some time for some (more) projects.

I've had to have 2nd and 3rd thoughts about this Clan.

quote:

---

Originally posted by motorcycle_mayhem
It was a very carefully built angle grinder though.... 1040cc, R23 cam, worked crank/head, etc., etc., fed via a pair of 45 DHLAs. Red pipes you see are to the front radiator, nothing in the back except engine. The rattle on pull off is from the clutch ( a heavily modified twin plate) and release mechansm.
What no-one notices from the video (unless they're an Impist) is that I select *reverse* gear to pull away.....
It's a specially built S/C 5 Speed! (space was machined in the casing where reverse used to be). The clank is the QM plate differential.

No, it didn't roll, despite the antique swinging arm suspension. In all, one of the most fun cars I've ever had.
No match (now) for the BEC's, but at the time, I held many 1400cc circuit records.

Great car, great era.

I now have BECs, but always have had a passion for putting a GSXR in a Clan, just not enough life to do all this when you're competing. When I hit 50, life ends, and I hang up my helmet and spend my incontinent days eating liquidised food, then I'll perhaps have some time for some (more) projects.

I've had to have 2nd and 3rd thoughts about this Clan.

---

Drew 1

Drew 2

Look out for this on EBAY from Sunday!

[Edited on 12/7/11 by Parky]

Now on EBAY!

CLAN CRUSADER, HONDA BIKE ENGINE, HILLMAN IMP, KIT CAR | eBay

Engine set up now on Ebay. Rolling Shell available seperately if needed. I would still prefer to sell the car as a whole project and not break!