Time to try and make some space in my garage so a few items up for grabs. Collection only for these items I'm afraid, but that can be from Bracknell, one of the Newlands meets or the Stoneleigh show.

I've tried to be very fair with the pricing, but if you think I've got it wrong by all means try an offer, I won't be offended (much).

This also coincides with my first ever attempt to post pics on locostbuilders, so if I cock up please be gentle with me.... Pics are in photo archive if needed.

Here we go,

1 - Pair of unused brake disks 240mm, 48mm offset, 4x108. I think possibly of Peugeot origin, handy for that rear disk conversion? £15


Brake disks 1


Brake disks 2


2 - Escort mk2 wheel with usable tyre. Free to collector.


Escort wheel


3 - Xflow stainless 4-2-1 exhaust. Originally a Caterham item I think, the outlet angle has been modified slightly to suit a standard width locost. £30


Xflow exh manifold


4 - A selection of alternators from k series engines. All working to the best of my knowledge. From L-R £5, £10, £15, or £25 for the lot.


k series altenators 1


k series altenators 2


5 - 32DGAV carb & manifold removed from a 1600 xflow GT spec engine. In excellent clean condition, £30.


xflow carb & manifold


6 - Nippon Denso alternator in excellent condition. Hopefully the label will id it, may have been from a Daihatsu Charade. £15



Denso altenator 1


Denso altenator 2


7 - Sierra brake m/c with reservoir, fairly new item as removed from my Locost, £15.


Sierra m/cylinder


8 - Brand new Ford brake m/c plus reservoir, 19mm bore, 4 outlets. £15.


New m/cylinder


9 - K series head in excellent condition. bought as a spare but never used. Distributor EU2, looks fairly new. £50


k head 1


k head 2


10 - Escort RS2000 type 9" rear drum brakes. Backplates redrilled to suit locost, original drillings obviously still usable if needed. Good shoes, drums and cylinders, all springs/fittings included, just need a fresh lick of paint. £25


Escort 9" rear brakes


11 - Rover VVC aluminium (not plastic!) intake plenum. Throttle body missing, otherwise complete, £25


k vvc plenum


12 - k series starter. £10.


k series starter


13 - GSXR600 airbox, no trumpets, £5.


GSXR600 airbox


14 - Rover coilpack, £5.


k HT coilpack


15 - Unused, reconditioned Pinto starter. Not sure exactly which Pinto, see photos for more info. £25.


Pinto starter 1


Pinto starter 2

Hi' i'll have the ointo starter please, if your able to post it.

LOL, not sure how that one crept in. I'll try that again


Pinto starter 1

Damn, it's obviously convinced that's a Pinto starter, I'm guessing I've got two pics in the archive with the same title.

You all know what one looks like anyway....

[Edited on 30/3/11 by GeoffT]

I would take the carb and manifold but only if you are able to post. See what you think and PM me the total cost and your address for payment if you could do that.

I'm intrested in the Sierra M/C chap - posted?

Does the exhaust manifold bring the exhaust out the side of the car for a side mounted silencer? The xflow on the Dutton has a normal under car system and it's limiting the ride height as seen here:


(will also need to sort the sump as well of course!)

I'm really trying to avoid getting involved with p&p, but I'll check out the likely cost and get back to you both.

Yes, it's a side exit manifold. It fits a locost perfectly but would almost certainly need modding to fit the Dutton.

Because a Duttons ugly?

Any chance you could measure from engine face of manifold to centre line of outlet please?

can i take the Nippon Denso alternator please
can pick up
thanks
Alex

Item 6 (Denso alternator) now sold.

New ford master cyl please for me ( As long as it is defo 19mm bore) Am just leaving now but will U2U you later regarding payment/postage.

quote:

---

Because a Duttons ugly? Any chance you could measure from engine face of manifold to centre line of outlet please?

---

quote:

---

Originally posted by GeoffT

quote:

---

Because a Duttons ugly? Any chance you could measure from engine face of manifold to centre line of outlet please?

---

Do I detect a slght oversenstivity there............

The measurement you require is around 17".

---

Hi Geoff, if montythemole doesn't want the exhaust manifold, can I have second dibs please.
It's too far for me to collect but I will happily pay the postage.
U2U sent.

Looks safe to say then that item 3 (xflow ex manifold) is now sold.

Item 7 (Sierra m/cyl) now SOLD

Item 8 (Ford m/cyl) now sold.

Item 5 (32DGAV carb and manifold) now sold.

Hi,

If for any reason Alex decides he doesn't want the Nippon Denso alternator I'd be interested. Can also collect.

Cheers,

Martin.

[Edited on 31/3/11 by Cheffy]

quote:

---

Hi, If for any reason Alex decides he doesn't want the Nippon Denso alternator I'd be interested. Can also collect. Cheers, Martin.

---

Just an unashamed bump really, but as mentioned try an offer if you fancy anything.

Earth to Geoff!

Come in please... you time is up!

http://www.locostbuilders.co.uk/viewthread.php?tid=153284

Belated thanks for the manifold, not fitted yet but using hi-tech 'holding it in place' technology looks the business. Now to sort a side mounted silencer and a shortened sump and I can have the Dutton in the weeds.

I know most have probably looked and found the starter picture in the archiove, but for those who have, for some reason the pinto starter is saved under /gallery/4DSCF0043.JPG, and the other pic is under /uploads/4DSCF0043.JPG

That should be a nice straightforward fitting job, looks like it's found a new home....

Geoff.

That was referring to the exhaust manifold post, but thanks loggyboy for the starter picture correction.

[Edited on 19/4/11 by GeoffT]