Board logo

zx9 engine / seats / diff & bits
Andy W - 2/2/10 at 07:12 PM

Hi

Thinking of selling some bits, I collected with the thought of a project. But might start a different project now.

Zx9 engine (bought as spare for my Indy but never needed) engine is really clean and comes with carbs airbox etc.
full wiring harness with no cut wires
set of clocks
pair of cobra seats (not mint have a few nicks in them, but could be sorted with sikaflex etc)
Sierra propshaft
7.5" diff ratio 3.6 including shafts & hubs (granada)
Sierra steering rack

would really like to sell everything in one go and not split
looking for £650 for everything.

I've never had the engine running but have turned it over regularly

Thanks Andy


ginger ninja - 2/2/10 at 07:20 PM

which zx9 is it b, c, e.....series. Any idea re milage ?


Peteff - 2/2/10 at 07:21 PM

What series bike was the engine from for anyone who is interested ? B,C or E as there are differences. Great minds and all that, you were faster than me though

[Edited on 2/2/10 by Peteff]


Toprivetguns - 2/2/10 at 08:30 PM

Any pictures of the seats?

Ta


Andy W - 2/2/10 at 08:59 PM

the engine is c model, not sure of the mileage, but it is very clean at the front, and i've never cleaned it, so I wouldn't say it's done many miles. I did over 10k in my Indy and the engine in that never missed a beat. This engine is cleaner than the one I put in my Indy.
I could get a picture of the seats, but it would be weekend, before I get in loft
Andy


Andy W - 7/2/10 at 08:39 PM

Bump

New price £600

Andy


JoelP - 7/2/10 at 08:46 PM

not a bad price for the lot.


Andy W - 14/2/10 at 05:17 PM

A few people have asked for some pictures, so here we are.
The pictures of the engine are how I got it, I have not cleaned it all, looking round the sprocket area I would say the engine has not done many miles.

Cheers Andy


zx9 engine
zx9 engine


zx9 engine close
zx9 engine close



zx9 clocks
zx9 clocks


Andy W - 25/2/10 at 10:35 PM

Bump bump

Andy


Andy W - 7/3/10 at 12:06 PM

Bump Bump Bump

Andy


donn006 - 7/3/10 at 08:35 PM

hi still interested in the seats if your willing to sell separetly