Still have my haynes roadster chassis left for sale.
Its fully welded to a good standard, fully bracketed with parts from 3GE.
It has had a couple of coats of acid etch weld through primer and a top coat.
Ali floor is fitted, behind seats panel is cut just need riveting(fit is really nice), tranny side panels are cut and ready to be fitted.

Basically a ready to go roadster chassis.
Will let it go for £400 (the cost of the materials I put into it), New with the panelling and paint would be around £900.

I've had a few locosters round to pic up other bits and they have all commented how good the chassis looks!


link to pictures

http://www.haynes.co.uk/forums/showthread.php?p=7977#post7977

Mike

[Edited on 4/12/08 by mikeb]

Unless you are a member of that other forum it appears to be imposable to look at the pictures

you mean your not all members of the sister haynes forum, shame on you

[Edited on 4/12/08 by mikeb]
Rescued attachment chassis 1.jpg

sorry about the quality the haynes forum is really tight on image size
Rescued attachment chassis 2.jpg