emsfactory
|
| posted on 20/1/06 at 03:27 PM |
|
|
Triton, some seat info please.
Hi triton,
can you put up some pics of your narrow seats and give me the prices. Small car and I aint a lardy.
Measurements would be good too.
What is postage to Glasgow gonna be?
|
|
|
|
|
Triton
|
| posted on 20/1/06 at 08:49 PM |
|
|
Seats are 390mm wide, 830mm from floor to top of headrest and the canny bit is they are £195.00 inc postage to Glasgow.
 
Rescued attachment Pair high side smoothy seat side view.jpg
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
simes43
|
| posted on 20/1/06 at 09:21 PM |
|
|
Hi Triton
If its one like these in the photo then next Friday would be great!
Let me know how you want paying, Paypal OK
Cheers
Simes
|
|
|
Triton
|
| posted on 20/1/06 at 09:26 PM |
|
|
Sime43,
Yes I can get one of the above to you for next friday....paypal tickety boo with me.
I have u2u'd you by the way.
Cheers
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
ed_crouch
|
| posted on 22/1/06 at 08:28 PM |
|
|
Are they 195 each or per pair??
Sorry for being dumb...
I-iii-iii-iii-ts ME!
Hurrah.
www.wings-and-wheels.net
|
|
|
Triton
|
| posted on 22/1/06 at 10:25 PM |
|
|
Now worries mate i have "senior moments" everyday just recently.
Price is for a pair...mad i know but hey!
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
Fishface
|
| posted on 23/1/06 at 04:27 PM |
|
|
do they fit into a tiger avon do you know?
What about runners / fixing points?
cheers
|
|
|
Triton
|
| posted on 23/1/06 at 09:16 PM |
|
|
Yes they fit the Avon, Lightning on the forum has some in his car ....Exeter if i remember right or at least close to it.
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
welderman
|
 posted on 26/1/06 at 09:57 PM |
|
|
Again
Thread hijack.
Triton, you know ive asked this before, but so much going on in my head at the moment ive forgot. Do those seats fit the Mad Mini, and also now the
daft bit. Will they go flexi as they will be QUITE close to my engine.
 
Rescued attachment Pictures30.04.05 006.jpg
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Triton
|
| posted on 26/1/06 at 10:21 PM |
|
|
You will need to create a heat shield anyway as that little beast will cook you alive...
I can use high temp resin if you fancied paying a quid or so more to feel safer
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
welderman
|
| posted on 26/1/06 at 11:01 PM |
|
|
How much more?. How easy would it be for you to make the back of the seats smooth too.
( are the seats like mk's by the way)
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Triton
|
| posted on 26/1/06 at 11:17 PM |
|
|
quote:
Originally posted by welderman
How much more?. How easy would it be for you to make the back of the seats smooth too.
( are the seats like mk's by the way)
Wide seat isn't like an MK seat, the sides are low making it more suitable for cars with doors.
Having the backs in gel coat means making two seat in effect then bonding them together so would be expensive as new plug and moulds required.
Tissue on the backs smoothes out the matt and gives a finer surface finish.
Approx £20 to £25 more to use High temp materials....you still need the firewall so why not let that do the job and save yourself some money?
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
welderman
|
| posted on 26/1/06 at 11:56 PM |
|
|
So it's the low sided ones which are suited for the Mad Mini. The ones without hole in bottom. Think they will look and feel ok when ive got the
harness on.
[Edited on 26/1/06 by welderman]Image deleted by owner
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Triton
|
| posted on 27/1/06 at 12:05 AM |
|
|
Depends on you but yes either the narrow one on the left or the wider one on the right.
Trying to climb into a high sided seat thru a door will be painfull i think...edge of seat going somewhere perhaps...
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
welderman
|
| posted on 27/1/06 at 07:43 AM |
|
|
Ok then, i have mk seats, so which one is the closest for like for like. ie my bum etc fits ok in what i have in my indy.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Triton
|
| posted on 27/1/06 at 08:41 AM |
|
|
Left hand one...(the narrow ones) and cheap as chips at only £190 per pair inc postie's bit.
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
welderman
|
| posted on 28/1/06 at 12:05 AM |
|
|
quote:
Originally posted by Triton
Left hand one...(the narrow ones) and cheap as chips at only £190 per pair inc postie's bit.
Mark
Tissue on the backs smoothes out the matt and gives a finer surface finish.
Is this quite durable or will it come off after getting in and out of the Mad Mini, ie grabbing hold of the side to get in and out.
Do you take Pay-Pal.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
turboted
|
| posted on 28/1/06 at 01:51 PM |
|
|
what was the answer to the fixing question? side or bottom.
cheers
|
|
|
welderman
|
| posted on 28/1/06 at 03:12 PM |
|
|
Rear seats don't quite match though.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Triton
|
| posted on 28/1/06 at 11:34 PM |
|
|
Side or base mount available and both use steel M8 inserts bonded into base section.
Cheers
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
welderman
|
| posted on 31/1/06 at 08:36 AM |
|
|
Just realised that the Mad Mini will have door bars, so may get away with the belt holes in the seats. Same price Triton?.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Triton
|
| posted on 31/1/06 at 08:40 AM |
|
|
Welderbloke,
Yes low side and high side narrow jobbies are same price.
low sides not as low as you think though still hold you in, just makes it easier to fit the belts as they go over rather than through the seat.
Always go for the wizardy hat ones
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
welderman
|
| posted on 31/1/06 at 02:04 PM |
|
|
u2u
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Triton
|
| posted on 31/1/06 at 09:03 PM |
|
|
Indeedly you did
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
welderman
|
| posted on 1/2/06 at 12:28 PM |
|
|
So how do i pay?
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
