greavesy7
|
| posted on 5/11/14 at 12:00 AM |
|
|
Tunnel top
Can people post some pics of there transition tunnels please I need some inspiration
|
|
|
|
|
SPYDER
|
| posted on 5/11/14 at 12:26 AM |
|
|
Here are the tunnels in the Phoenix and the Locost that came before it...
|
|
|
Turbo Tez
|
| posted on 5/11/14 at 06:59 AM |
|
|
Il be tackling this job in the next week so watching with interest. It's defenitley one of those jobs that can make of break the finished look
of your car.
|
|
|
907
|
| posted on 5/11/14 at 07:18 AM |
|
|
The top of mine forms a sort of sunken tray which I thought would be a handy place for a bag of sweets, eye-phone, etc.
It also doubles as a parts tray for when the inevitable roadside repair is needed. Nothing worse than having to search for
a dropped screw in the long grass. Us Locosters with Lotus engines have to think of these things.
Paul G
|
|
|
AndyW
|
| posted on 5/11/14 at 10:00 AM |
|
|
 
Description
|
|
|
Smoking Frog
|
| posted on 5/11/14 at 10:19 AM |
|
|
 
Gearstick trim ring
 
Handbrake
|
|
|
dhutch
|
| posted on 5/11/14 at 12:42 PM |
|
|
Not got a photo to hand, but mine is just matt black painted alu, fairly thick gauge (2.5mm?) with rounded edges. As far as I know that was std
westfield back in 1991.
Sides are covered in vinyl, which goes up the side and over to end on the chassis tube, then the top goes down and finishes the job, held on with self
tappers so you can get to the handbrake and remote linkage on the back of the type9.
Daniel
|
|
|
Slater
|
| posted on 5/11/14 at 01:19 PM |
|
|
1.2mm ali, sprayed black, with Hockey stick trim over the edges, rivnuts and countersunk screws, so can be removed if required.
[img]
 
dash post sva 2
[/img]
Why do they call Port Harcourt "The Garden City"?...... Becauase they can't spell Stramash.
|
|
|
greed1
|
| posted on 5/11/14 at 01:23 PM |
|
|
Here's mine similar to slaters but with carbon
 
handbrake 2
Drive it stright sideways
|
|
|
greavesy7
|
| posted on 5/11/14 at 05:39 PM |
|
|
Is that the name of that edge trim " hockey stick ?
Mine was the same as Andy w but thinking of going for carbon with a black anodised edge and carbon dash to match
|
|
|
big-vee-twin
|
| posted on 5/11/14 at 06:10 PM |
|
|
Formed ally sheet to form rolled top
[img]
 
tunnel top
[/img]
Then covered with di-noc
[img]
 
Gear Lever fitted
[/img]
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
zx12r dug
|
| posted on 5/11/14 at 08:35 PM |
|
|
 
Description
carbon effect panels with alloy trims powdercoated orange IVA friendly dash to be finished
|
|
|
zetec
|
| posted on 6/11/14 at 08:49 AM |
|
|
 [/img]
" I only registered to look at the pictures, now I'm stuck with this username for the rest of my life!"
|
|
|
