longacre mirror

Not logged in [Login - Register]

LocostBuilders » Forum » Interior & Seating » longacre mirror

MIG Welders & ARC Welders at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

mortsi

Junior Builder

Posts 90
Registered 11/8/13
Location west yorkshire
Member Is Offline

Photo Archive Go!

Building: mk indy

posted on 27/10/13 at 03:46 PM

longacre mirror

about to purchase a longacre rear view mirror and brackets

wheres the cheapest place to get one from and cant decide wether to go for the 14" or 17"?

Ben_Copeland

272bhp - 309ft/lb

Posts 6088
Registered 25/12/02
Location Margate, Kent
Member Is Offline

Photo Archive Go!

Building: OTR : Z20LET Equinox Haynes Roadster

posted on 27/10/13 at 03:51 PM

eBay when I bought mine. Didn't bother with the over prices brackets and made my own.

Ben

Locost Map on Google Maps

Z20LET Astra Turbo, into a Haynes Roadster

Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!

mortsi

Junior Builder

Posts 90
Registered 11/8/13
Location west yorkshire
Member Is Offline

Photo Archive Go!

Building: mk indy

posted on 27/10/13 at 04:05 PM

what did you make the brackets from? noticed a few different people have mad their own brackets.
was going to buy the longacre ones to save hassle and thought they looked ok

Ben_Copeland

272bhp - 309ft/lb

Posts 6088
Registered 25/12/02
Location Margate, Kent
Member Is Offline

Photo Archive Go!

Building: OTR : Z20LET Equinox Haynes Roadster

posted on 27/10/13 at 05:07 PM

Ally strips and a bit of foam tape to stop them sliding. I'll get some pictures if you like

Ben

Locost Map on Google Maps

Z20LET Astra Turbo, into a Haynes Roadster

Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!

mortsi

Junior Builder

Posts 90
Registered 11/8/13
Location west yorkshire
Member Is Offline

Photo Archive Go!

Building: mk indy

posted on 27/10/13 at 05:21 PM

ye be good post some pics up

Ben_Copeland

272bhp - 309ft/lb

Posts 6088
Registered 25/12/02
Location Margate, Kent
Member Is Offline

Photo Archive Go!

Building: OTR : Z20LET Equinox Haynes Roadster

posted on 27/10/13 at 05:25 PM

Description

Description

Not mine but identical to mine

Ben

Locost Map on Google Maps

Z20LET Astra Turbo, into a Haynes Roadster

Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!

40inches

Contributor

Posts 5007
Registered 16/2/05
Location Eckington, Derbyshire
Member Is Offline

Photo Archive Go!

Building: MK Indy, Jaguar AJ30 V6 engine

posted on 27/10/13 at 05:44 PM

Would large rubber lined stainless P clips work? link
They come up to 60mm dia.

renetom

Contributor

Posts 649
Registered 9/7/10
Location Gatwick Sussex
Member Is Offline

Photo Archive Go!

Building: Built Mk with R1 engine

posted on 27/10/13 at 05:46 PM

Hi
Ebay for the mirror, but don't buy the brkts
they failed the iva on ours & are bloody expensive to boot
Made our own which passed fine. 14" is plenty big enough.

Interior trim

Mirror Brkts

good luck

b3ngy

IVA passed

Posts 258
Registered 1/4/12
Location Fareham
Member Is Offline

Photo Archive Go!

Building: Mk indy hayabusa

posted on 27/10/13 at 05:53 PM

I went with the 14" mirror which is plenty big enough imo. I also didn't bother with the brackets and made mine own, very similar to Ben_Copeland.

LocostBuilders » Forum » Interior & Seating » longacre mirror

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.