Barkalarr
|
| posted on 9/1/13 at 09:21 PM |
|
|
What to buy - Transmission Tunnel Edge Finishing
I've had a fellow Locoster round tonight to have a look at my car and he suggested finishing off the transmission tunnel and side of the car
with p channel edging (he did also mention hockey channel edging) which was on a horse box. I've done a quick google and can't find
anything - probably because I'm not looking for the right thing.
Anyone know where I can get some lengths of material which will finish off the edge of the tunnel and sides of the car to take off the sharpe edge for
the IVA.
What has everyone else used?
|
|
|
|
|
cerbera
|
| posted on 9/1/13 at 09:58 PM |
|
|
Like this?
 
http://www.simmal.co.uk/welcome/ product code MM16
|
|
|
Barkalarr
|
| posted on 9/1/13 at 10:00 PM |
|
|
Exactamundo!
|
|
|
mackei23b
|
| posted on 9/1/13 at 10:26 PM |
|
|
Have link on me, this is what I used...
http://www.woolies-trim.co.uk/p-1039-cope-moulding.aspx
Cheers
Ian
|
|
|
Davegtst
|
| posted on 10/1/13 at 12:01 AM |
|
|
Cope moulding number 11 is the exact same one mk use.
http://www.clickmetal.co.uk/Angle-Types/Mouldings/Aluminium
-Cope-Mouldings/p-16-8-16/
|
|
|
renetom
|
| posted on 10/1/13 at 09:26 AM |
|
|
trim
Hi
We used as previously said Aluminium Cope Mouldings
on the tub edges, which we polished up, and kitchen worktop end caps
which come with an anodised finish & were cheap on ebay for
the tunnel edges.
 
Interior trim
Good luck
René
|
|
|
Barkalarr
|
| posted on 10/1/13 at 09:28 AM |
|
|
quote:
Originally posted by renetom
Hi
We used as previously said Aluminium Cope Mouldings
on the tub edges, which we polished up, and kitchen worktop end caps
which come with an anodised finish & were cheap on ebay for
the tunnel edges.
Interior trim
Good luck
René
Rene, what's the gaiter you have over your handbrake? where did you get this from - I also need one.
Cheers
|
|
|
renetom
|
| posted on 10/1/13 at 09:37 AM |
|
|
trim
Hi
Car builders solutions , but we had to cut it about some to fit the sierra handbrake
the aly surround we made from thick aly sheet & polished it.
René
|
|
|
.jpg){kind=avatar}
