mccsp
|
| posted on 22/2/09 at 10:56 AM |
|
|
19mm Radius Question
Hi,
Trying to get my dash finished today.
Is the 19mm radius just the front lower edge, (Picture Left, dash viewed from the side) or the hole lower edge (picture right)
First time I have tried to post a picture, so hope it works.
The reason I ak, is that I don't have a piece of wood big enough to do picture left, without a 45min round trip to get some.
Thanks in advance
 
Dash Lower Edge
[Edited on 22/2/09 by mccsp]
|
|
|
|
|
adithorp
|
| posted on 22/2/09 at 11:04 AM |
|
|
Think its the left picture.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
mookaloid
|
| posted on 22/2/09 at 11:35 AM |
|
|
I'd go for the left one too
"That thing you're thinking - it wont be that."
|
|
|
stevec
|
| posted on 22/2/09 at 12:07 PM |
|
|
May be glue a length of broom handle to the back edge to give more depth.
Steve.
|
|
|
supercat
|
| posted on 24/2/09 at 04:34 PM |
|
|
I bought the CBS radiused dash blank and it has a full 19mm 'U' like the one of the left....
|
|
|
