can anyone tell me what car these are from???
[img][/img]
look like triumph herald to me
Cheers
Mark
BL 1300 VP or GT....showing my age now
quote:
Originally posted by theconrodkid
BL 1300 VP or GT....showing my age now
what do ya think about fitting them to locost anyone see major probs with senders etc etc 1300 gt
thanks
chris
Rims on the instruments may be a problem due to radius?
While they are similar to the Triumph items but looking at the details I am 90% sure they are from either Singer Vogue (Arrrow range) or Sunbeam
Alpine Fastback (Arrow Range)
The speedo calibration in number of cable turns per mile will be a number roughly in the range 800 to 1200 written in a tiny font at the bottom of
the speedo dial face -- usually about the 6 o'clock position.
[Edited on 10/5/08 by britishtrident]
Singer Vogue Arrow range 1967 to 1971
Rescued attachment voguearrowmodel.jpg
Sunbeam Alpine 1970 to 1975
Really a poverty spec Rapier with a single carb and a Singer Vogue dash.
Rescued attachment std_1975_sunbeam_alpine.jpg
quote:
Originally posted by britishtrident
Sunbeam Alpine 1970 to 1975
Really a poverty spec Rapier with a single carb and a Singer Vogue dash.
quote:
Originally posted by mookaloid
quote:
Originally posted by britishtrident
Sunbeam Alpine 1970 to 1975
Really a poverty spec Rapier with a single carb and a Singer Vogue dash.
All the Rapiers I've seen had individual dials for fuel, temp, oil etc - with orange needles and lettering if I recall.
Cheers
Mark
quote:
Originally posted by britishtrident
quote:
Originally posted by mookaloid
quote:
Originally posted by britishtrident
Sunbeam Alpine 1970 to 1975
Really a poverty spec Rapier with a single carb and a Singer Vogue dash.
All the Rapiers I've seen had individual dials for fuel, temp, oil etc - with orange needles and lettering if I recall.
Cheers
Mark
I didn't say they were off a Rapier --- The Alpine used the veneered plywood Singer/Subeam Vogue dash.
pic of clocks in BL 1300 gtImage deleted by owner
As for using them in a locost. Iv got old smiths gauges in mine. All the senders are easily available.