Board logo

Dash panel blanks
Triton - 10/7/05 at 12:42 PM

Universal dash blank with SVA lower radius in fibreglass that will fit the "book" scuttles available from the likes of GTS, MK, Luego as well as many others.
So it can be made to suit all the above it was made slightly bigger so will require trimming to suit your scuttle.
These retail eslewhere for £65.00(£85.00 in carbon fibre) but i am doing the first 10 at £45.00(65.00 in carbon fibre) on a first come first served basis to the forum.

Cheers
Mark


Avoneer - 10/7/05 at 12:59 PM

Are they flat across the bottom or do they have a "leg" on each side?

Like this:

Pat... Rescued attachment CIMG2696.JPG
Rescued attachment CIMG2696.JPG


Triton - 10/7/05 at 01:02 PM

Sorry i forgot to post the picture.
They are bigger around the edge so can be trimmed to suit. I have tried it against MK's,Mac#1's,GTS, and a book lowline scuttle and with some fanooodling with a grinder can be trimmed down to suit all of them.
Mark Rescued attachment Universal kitcar dash panel1.png
Rescued attachment Universal kitcar dash panel1.png


Avoneer - 10/7/05 at 01:17 PM

Hi Mark,
Any chance of the dimensions between the inside and outside edges of the legs?
If it'll fit, I'm up for a carbon one if that's ok.
Cheers,
Pat...


Deckman001 - 10/7/05 at 01:18 PM

Go on then Mark, I'll ave one I guess it fit the blue scuttle I had of you ?

Jason
oh yeah,, F/G

[Edited on 10/7/05 by Deckman001]


Triton - 10/7/05 at 01:23 PM

Pat,
Overall length= 42"
Inside legs= 38 7/8"

Cheers
Mark

If enough bodies ask(about 10 will do) i could be persuaded to make a wider version for those using the Mcsorley plans....hint hint


Triton - 10/7/05 at 01:29 PM

Jason,
Yes mate as that was the book lowline jobbie.

Eurosport tonight...Moto GP USA....the Yamaha's are in Kenny Roberts colours...yeeeeehaaaa do they look the dogs wotsits...and maybe showing my age but that's the colour all Yamaha's should
Cheers
Mark


nige - 10/7/05 at 06:45 PM

put me on your list please
one plain one to go


Triton - 11/7/05 at 06:28 PM

To make it easier all round clicky this number into ebay.......4561601385


ned - 12/7/05 at 09:02 AM

i have what i believe is the first carbon one mark did some time ago as a special request for me.

it's basically the same as the off the shelf stuart taylor one, but cheaper

Ned.


Triton - 12/7/05 at 01:04 PM

Indeedly you did Ned.


Scotty - 12/7/05 at 02:06 PM

subject to it fitting the viento, i'll have one
cheers


Triton - 12/7/05 at 06:03 PM

Viento....is that the wide or narrow one?......How wide at widest point is the scuttle ?

Mark


Triton - 16/7/05 at 01:36 PM

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4561601385&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1


Scotty - 16/7/05 at 01:38 PM

will look check it and let you know
(its the wide one)


Triton - 17/7/05 at 08:49 AM

Overall width of chassis is all that is needed or where you feel dash needs to mount from on the Viento.