I've had a fellow Locoster round tonight to have a look at my car and he suggested finishing off the transmission tunnel and side of the car with p channel edging (he did also mention hockey channel edging) which was on a horse box. I've done a quick google and can't find anything - probably because I'm not looking for the right thing.

Anyone know where I can get some lengths of material which will finish off the edge of the tunnel and sides of the car to take off the sharpe edge for the IVA.

What has everyone else used?

Like this?




http://www.simmal.co.uk/welcome/ product code MM16

Exactamundo!

Have link on me, this is what I used...

http://www.woolies-trim.co.uk/p-1039-cope-moulding.aspx

Cheers

Ian

Cope moulding number 11 is the exact same one mk use.


http://www.clickmetal.co.uk/Angle-Types/Mouldings/Aluminium -Cope-Mouldings/p-16-8-16/

Hi
We used as previously said Aluminium Cope Mouldings
on the tub edges, which we polished up, and kitchen worktop end caps
which come with an anodised finish & were cheap on ebay for
the tunnel edges.

Interior trim
Good luck
René

quote:

---

Originally posted by renetom
Hi
We used as previously said Aluminium Cope Mouldings
on the tub edges, which we polished up, and kitchen worktop end caps
which come with an anodised finish & were cheap on ebay for
the tunnel edges.

Interior trim
Good luck
René

---

Hi
Car builders solutions , but we had to cut it about some to fit the sierra handbrake
the aly surround we made from thick aly sheet & polished it.
René