how have you guys mounted the threaded eye bolts for the lower harness mounts? i have the trs harnesses with clip on mounting buckles but i dont fancy just bolting the eye bolts to the to the ali floor!

threaded bush welded to the chasis, I have seen people recommend photoghraphing the way the mounts are fitted for IVA purposed. These have to be substantial mounts as the forces applied upon impact are massive

[Edited on 17/11/10 by austin man]

Does the MNR chassis not have lower belt mounts welded into the chassis?

No lower mounting points on the Mnr chassis

Sorry to hijack, but can lower anti dive belts be bought ???
if so were, as i may need a couple !!

Regards

Steve

quote:

---

Originally posted by daniel mason
No lower mounting points on the Mnr chassis

---

quote:

---

Originally posted by daniel mason
No lower mounting points on the Mnr chassis

---

Here you go


Description

quote:

---

Originally posted by Johneturbo
Here you go


Description

---

quote:

---

Originally posted by blakep82

quote:

---

Originally posted by Johneturbo
Here you go


Description

---

isn't that still 2 plates short though?

---

Ditto with what Adrian said

it has those small steel plates welded in but they are only very thin (2-3 mm) and i dont want to use them as my only protection. any other options?

what you need to do is when you buy your harneses also buy these to sit under




will be fine unless you weigh 50stone!?

the steel plates are for the harnesses

you think about how much force you'd require to brake them.. sheesh

[Edited on 18/11/10 by Johneturbo]

thanks mate! where can i buy a couple of pairs? they will do nicely.

I bought mine from sabelt uk, when i also got my harnesses

try HERE

thanks mate. very helpful!