Thinking about some lighter weight/less bulky seats for my ST. I have currently got Westfield sports seats which are OK but a bit chunky. Possibilities for consideration include:

Shell seats (which ones? Triton, MK, Mac#1, ebay sellers? e.g. this one) which don't have padding... I must say I have always been a bit wary of putting my @rse on hard plastic for any length of time.

Westfield race seats which seem to have ready-fitted padding.

Lotus Elise seats - ready padded (somewhat), not sure about weight?

Any other ideas guys?

Cheers,

Simon

binbag'n'foam racing seat - if you're the only driver? Cheapest, lightest and most comfortable. Can even be trimmed if look is important.

The shell seats are actually very comfortable if you get the correct width (too narrow or too wide are both bad).

Yip way more comfy than they look, so completely supportive you have no pressure points like ordinary seats. Might be a good idea to pad behind your head though in the event of a shunt.

Also consider Intatrim Odysey seats. I have them in the Indy and they're really comfy. A GRP shell, properly trimmed and padded, but no excess weight...

quote:

---

Originally posted by nick205
Also consider Intatrim Odysey seats. I have them in the Indy and they're really comfy. A GRP shell, properly trimmed and padded, but no excess weight...

---

Mr Humbug,
If you can get to the Exeter Show you can try my seats for size, will have all on show on wee box things so you don't have to struggle about on the floor...If you have the right seat that fits you then you don't need padding as they are contoured and you become part of the car once strapped in so you can enjoy the drive more as you can feel what's going on sooner..... P.S My superlite seats weigh same as Carbon fibre ones at a fraction of the price, in fact you get two for less than the price of one carbon seat which to me as a bit of bargain really unless you are into carbon that is.

Cheers,
Mark

I have an ST and had Intatrims in mine but sold them and bought a pair of Westerfield 'seconds' fibreglass shells. Far more supportive and quite comfortable as well

quote:

---

Originally posted by TOO BADD
I have an ST and had Intatrims in mine but sold them and bought a pair of Westerfield 'seconds' fibreglass shells. Far more supportive and quite comfortable as well

---

Quick question having looked at Triton's website...

Has anyone got a highback seat for the driver and a lowback one for the passenger? 99.9% of the time I have no passenger so the headrest is just providing extra wind resistance, but I want to have some seat just in case I ever do need to take a passenger.

Anyone done it?

Opinions? (apart from the fact it would look slightly unbalanced when static)

or... do I really need a highback seat on the driver's side?

quote:

---

Originally posted by Humbug
Quick question having looked at Triton's website...

Has anyone got a highback seat for the driver and a lowback one for the passenger? 99.9% of the time I have no passenger so the headrest is just providing extra wind resistance, but I want to have some seat just in case I ever do need to take a passenger.

Anyone done it?

Opinions? (apart from the fact it would look slightly unbalanced when static)

or... do I really need a highback seat on the driver's side?

---

I have the Triton low side varaint in mine and they are very comfortable indeed, and supportive.

I have taken a few different passengers for aride and every one has commented on how nice they are despite lookign at them and saying 'bet they hurt me arse'.

Steve

what about this, looks not too bad really
Rescued attachment 05c0_1.jpg

I'm looking at some alloy seat out of 3mm u2u me for details I'll be group buy to keep costs down

I have done a high back and a low back for folk who mainly drive the car on their tod as passenger seat just acts as a wind break really...if you had low side narrow seat it's the same size as the low back seat just one has a headrest the other doesn't...
Can also do the high side without the headrest if folk prefer..
If enough interest i may be persuaded to do the wide ones without headrest as well.

Cheers,
Mark

Defo sit in some first. I have Mac#1 early seats which i think are Tritons. Some other makes are a bit narrow for me. Some dont seem to have enough room for shoulders. Mine are great.

I also had a pad set made which makes them more comfy. Supplier will probs still have the pattern.

quote:

---

Originally posted by Triton
Mr Humbug,
If you can get to the Exeter Show you can try my seats for size, will have all on show on wee box things so you don't have to struggle about on the floor...If you have the right seat that fits you then you don't need padding as they are contoured and you become part of the car once strapped in so you can enjoy the drive more as you can feel what's going on sooner..... P.S My superlite seats weigh same as Carbon fibre ones at a fraction of the price, in fact you get two for less than the price of one carbon seat which to me as a bit of bargain really unless you are into carbon that is.

Cheers,
Mark

---

He actually says you can try them so he is probably going to have them. You guys are so lucky to be able to go to shows like that with so much stuff to drool over!! Maybe next year I'll make it over to one of them.

Tritons seats work really well, I was thinking of padding them but with winter coming along the extra clothing takes care of that.

has anyone tried these guys:
LusoMotors

Their prices dont look bad at all!

One more vote for Triton. Although, admittedly, I haven't actually driven very far yet, they put you to sleep when you are sitting in them still.