locoboy
|
| posted on 24/10/03 at 09:41 AM |
|
|
IRS uprights
Having got my new chassis and all the other bits and bobs, i need to sort out the wishbones and get them on.
the chassis came with a mix and match of wishbones (2 omplete rear sets), I beleive it is a book chassis, can anyone tell me the overall length from
the centre of the bush tube to the centre of the other bush tube/rosejoint on the top and bottom bones? (rear ones) Im using sierra shafts and
diff.
Also has anyone got a piccy of their irs set up without wheels and bodywork on? i need to check the location of the spacer, is it on the wheel side of
the upright or the diff side?
would be nice to see a picture anyway if anyone has one handy.
Does the amount of castor on the rear uprights have any effect on handling, i wouldnt have thought it would as the wheels are not subject to the
angles associated with steering like the front ones?
Cheers
Colin
Pinto.......... in the bin.........CBR on its way in!
|
|
|
|
|
Noodle
|
| posted on 24/10/03 at 10:22 AM |
|
|
Try this, from the Stafford show this year...
 
IndyRearUpright-1
.. and this too
 
mkindyrearsus2.jpg
All the images are available for download. A 2.3MB compilation and a higher-res 9.1MB compilation. The smaller one is
HERE and the higher res ones
HERE
Hope that helps,
Cheers,
Neil.
|
|
|
MK9R
|
| posted on 24/10/03 at 11:02 AM |
|
|
My site has shed loads of similiar pictures
Cheers Austen
RGB car number 9
www.austengreenway.co.uk
www.automatedtechnologygroup.co.uk
www.trackace.co.uk
|
|
|
