Pezza
|
posted on 10/1/08 at 05:28 PM |
|
|
paddle shift / column query
Was looking at my column and paddle shift earlier and noticed it's a tad wobbly ( technical term there )
Should I have some sort of bearing btween the shaft and the paddle shift housing you reckon?
Cheers
Ben
You couldn't pwn your way out of a wet paper bag, with "PWN ME!!" written on it, from the "pwned take-away" which originally contained one
portion of chicken tikka pwnsala and the obligatory free pwnpadom.
|
|
|
mad gaz
|
posted on 10/1/08 at 05:47 PM |
|
|
yes remove the one from end of sierra colume
Rescued attachment gulf indy 010.jpg
|
|
mark.s
|
posted on 10/1/08 at 05:49 PM |
|
|
you need the bearing out of the sierra colume, just needs pressing in
|
|
Pezza
|
posted on 10/1/08 at 05:52 PM |
|
|
Cheers lads, i'll try and hunt one down.
You couldn't pwn your way out of a wet paper bag, with "PWN ME!!" written on it, from the "pwned take-away" which originally contained one
portion of chicken tikka pwnsala and the obligatory free pwnpadom.
|
|
mark.s
|
posted on 10/1/08 at 08:18 PM |
|
|
if you get real stuck http://cgi.ebay.co.uk/FORD-SIERRA-STEERING-COLUMN-BUSH-KIT-SRK10_W0QQcmdZViewItemQQitemZ360007605756
|
|
Pezza
|
posted on 10/1/08 at 08:43 PM |
|
|
Cheers chaps, just ordered some £6 delivered is better than rooting through the scrappy lol
You couldn't pwn your way out of a wet paper bag, with "PWN ME!!" written on it, from the "pwned take-away" which originally contained one
portion of chicken tikka pwnsala and the obligatory free pwnpadom.
|
|
StevieB
|
posted on 10/1/08 at 09:58 PM |
|
|
That's the bush kit o go through the bulkhead.
There's a small bearing in the top of the sierra column in the aluminium colar that has the ignition barrel attached. It's very thin and
cheap looking, but it does the trick.
I don't have a photo, but someone might come along in a minute who does.
|
|