-matt
|
| posted on 19/6/10 at 09:28 AM |
|
|
fitting rear disks?
just a quick question,
if i get a donor sierra which has rear drums.
can i then just buy some rear callipers/carriers, or will i need different hubs Etc aswell?
cheers
|
|
|
|
|
big-vee-twin
|
| posted on 19/6/10 at 10:19 AM |
|
|
You can buy brackets for the conversion from 3GE Components and use the same bearing carriers.
The drive flange will need turning down to 134mm to fit inside the disc bell and then you can fit new sierra calipers. see below:
 
Rear Caliper Bracket
 
Rear Brake mods
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
