Lars
|
| posted on 26/5/10 at 05:19 PM |
|
|
t5 gearbox
Can anyone tell me the dimensions of the t5 gearbox?
Want to see if it fits down the locost tunnel.
Or does anyone near oxford have one that I could come and meassure?
|
|
|
|
|
SeanStone
|
| posted on 26/5/10 at 05:26 PM |
|
|
Chop up the tunnel and build it back up around it! 
|
|
|
SeanStone
|
| posted on 26/5/10 at 05:27 PM |
|
|
Or, if you have an ebay account, you could ask
http://cgi.ebay.co.uk/SIERRA-COSWORTH-T5-GEARBOX-BITS-NEEDS-REBUILD-COMP-/180512415031?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=
item2a0760dd37
Or anyone else selling one on ebay
|
|
|
Lars
|
| posted on 26/5/10 at 05:34 PM |
|
|
Yes I am watching it on ebay, and may ask him, he currently has a couple of T5s for sale.
Just wondering if anyone has the measurements to hand, or is local then I could take some measurements (probably easier).
Does the T5 have the same prop connecter as a Type 9? Or is it completely different?
[Edited on 26/5/10 by Lars]
|
|
|
philw
|
| posted on 26/5/10 at 05:48 PM |
|
|
Just had a quick google and came up with this, not sure if its what your after.
Spanner Monkey ENOFORD105E is on a distinguished road ENOFORD105E's Avatar
Join Date
Mar 2008
Location
SOUTH LONDON
Age
47
Posts
259
Thanks
3
Thanked 9 Times in 9 Posts
Re: some gearbox dimensions wanted please?
Just back with the tape!!!
BW T5 is 745mm stick to front edge of bellhousing. Width wise its 190mm centreline to extremis on startermotor side and 170mm on other
side....didn't measure the total length to confirm prop suitability though...doh
Must try harder
|
|
|
philw
|
| posted on 26/5/10 at 05:50 PM |
|
|
And theres this
.jpg)
[Edited on [1274896323R0=053131p: by philw]
Must try harder
|
|
|
AdamR
|
| posted on 26/5/10 at 05:52 PM |
|
|
There are some approximate measurements (say +/- 10mm) of my set-up below, but these don't include the width unfortunately, which is probably the
most important dimension. I can get some better measurements for you, but not until the week after next.
 
V8 + T5 dimensions
FYI, the output shaft is approx 27" mm diameter with 25 splines. Not sure if that's the same as a Type 9...
|
|
|
Lars
|
| posted on 26/5/10 at 10:17 PM |
|
|
excellent chaps, that is very helpful
why do I never find these things when I search??
|
|
|
