Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: FZR 600 Mikuni carb identification
Dickyboy

posted on 6/8/09 at 06:48 PM Reply With Quote
FZR 600 Mikuni carb identification

Having read GaryM's excellent post on installing FZR600 carbs on a Xflow I got a set from a well known auction site(?) to install on a 1600 Pinto. The post said, as others have, to drill the main jet to 1.5mm. Which is the main jet? Anyone know of documentation to a: identify exactly which carbs I have and b: which adjustment/jet does what? I also assume the carbs should be at a slight angle to make the top of the float chamber horizontal? without knowing and seeing the bike they were on I can't tell. Any other words of advice on these carbs.

[Edited on 6/8/09 by Dickyboy] Rescued attachment mikuni1.jpg
Rescued attachment mikuni1.jpg

View User's Profile E-Mail User View All Posts By User U2U Member
GaryM

posted on 6/8/09 at 08:17 PM Reply With Quote
Hiya

They don't look like my FZR600 carbs?

If you u2u me an email address I can email you the carbs section of the FZR600 workshop manual.

Cheers
Gary

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.