Dangle_kt
|
| posted on 19/7/09 at 04:54 PM |
|
|
Can anyone identify the track rod end so I can buy a replacement?
WHALLOPED the T.R.E to get it out and knackered the thread, so need a replacement.
pictures are below, can anyone identify what it is? I would assume am escort one, but not sure what mk. Fits into cortina hubs.
Thanks
 
tre1
 
tre2
 
tre3
[Edited on 19/7/09 by Dangle_kt]
|
|
|
|
|
blakep82
|
| posted on 19/7/09 at 04:57 PM |
|
|
if its for cortina hubs, and escort mk2 rack (which is M14 thread isn't it?) i think a cortina one would do the job. from the mk3,4 or 5
[Edited on 19/7/09 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Dangle_kt
|
| posted on 19/7/09 at 05:04 PM |
|
|
nice one blake!
|
|
|
blakep82
|
| posted on 19/7/09 at 05:09 PM |
|
|
if the rack is m14, the cortina one will fit, and it'll be the right taper.
only thing is, i don't know if there'll be any difference in the length (ie you might not have as much/enough adjustment) but it should be
fine
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Chaz
|
| posted on 20/7/09 at 05:19 PM |
|
|
Yes definitely M14 with a pitch of 1.5 (standard)
Do you need to know where to buy them from?
|
|
|
