Board logo

Wanted:45 degree 50.8mm 1.5mm wall stainless bend
RichardK - 31/12/10 at 10:53 AM

Needed a couple of these and have managed to pick 1 up for a tenner NEW 2' (50.80mm) STAINLESS STEEL 45 DEGREE BEND on eBay (end time 30-Dec-10 14:47:01 GMT) but the other seem to be double the money any one else got another going spare or know of where I can get another for ok money.

Cheers

Rich

Stott - 31/12/10 at 11:16 AM

Have you emailed the seller to see if he can do another for you?

steve m - 31/12/10 at 11:18 AM

Richard

I used some vacuum cleaner stainless bends in my cooling system,
they can be bought very cheaply from any cleaning company supplier

Steve

RichardK - 31/12/10 at 12:10 PM

quote:
Originally posted by Stott
Have you emailed the seller to see if he can do another for you?


Yeh, unfortuanantly he only had 2 to start with Steve I'll have a look in to that thanks

Rich

907 - 31/12/10 at 12:56 PM

If I needed two 45's I would cut a 90 in half.

Much savings.

Paul G

RichardK - 31/12/10 at 05:22 PM

Managed to get another for not much more, yeh, could have done the 90 degree thing but wanted the tails as well for a neat job.

Anyway thanks

Rich

Alan B - 31/12/10 at 07:33 PM

These guys are good......if you know anyone travelling back from the US soon...


http://www.mcmaster.com/#weld-tube-fittings/=ae1cn4

Forgot to mention...lots of parts modelled in 3D from these guys too...even the elbow...

[Edited on 31/12/10 by Alan B]