I have got my bolts mixed up, i need the ones that bolt the hub to the upright, ive got 2 sets, both the same thread, diameter and head size. One tapers off at the end and has a washer, the other has a little flange in the head.

See pic below.

Also what are the other bolts for?
Rescued attachment bolts.JPG

The top one is for mounting the hubs. Can't remember what the bottom one is for but I didn't need to re-use them in my Indy.

Cheers,
Matt.

neither look right,should be 19mm head and no washer

top one looks like rear hub carrier bolts to me

Bottom off the diff mounting plate? looks familiar...