Board logo

Tracking & Camber
pondskater292 - 25/10/06 at 06:46 PM

Just getting towards the end of building a trackday locost - 1760 crossflow to run on slicks - any advise on tracking and camber settings would be appreciated - thanks

mandbsheldon - 25/10/06 at 07:00 PM

My, that's a big picture
Leigh

DIY Si - 25/10/06 at 07:09 PM

Crikey, first time I've seen the avatar take up 95% of the screen!

Danozeman - 25/10/06 at 07:09 PM

That avatars a touch on the small side isnt it?? I can hardly see it.

scoey m - 25/10/06 at 07:18 PM

Whats your question can,t seem to find it
nice avatar mate

graememk - 25/10/06 at 07:22 PM

anyone sell 32" computer screens ?

indykid - 25/10/06 at 07:32 PM

i'm pmsl! i can't even see the post on my screen.

see this thread on suitable sizes for avatars.

tom

rjs - 25/10/06 at 07:32 PM

But what a good picture

indykid - 25/10/06 at 07:49 PM

well use this one instead then!

tom Rescued attachment hoooj avatar.jpg
Rescued attachment hoooj avatar.jpg

pondskater292 - 25/10/06 at 08:28 PM

kkkkkkkk I fixed the avatar now can anyone help ???

Phil. S - 25/10/06 at 10:03 PM

quote:
Originally posted by pondskater292
kkkkkkkk I fixed the avatar now can anyone help ???


It's still too big. It should be more like this

Avatar
Avatar

Oh that's smaller than mine! Well around taht size anyway.

As for your question, I'd have thought about 1.5 degrees neg camber front and 0-.5 degrees for the back. Not sure about tracking.

[Edited on 25/10/06 by Phil. S]

pondskater292 - 25/10/06 at 10:16 PM

sigh - And I thought u guys were helpful to new members ............

jos - 26/10/06 at 08:17 AM

Try something like

Tyre pressures - 18-22psi
-1.5deg toe in
Max castor
-1.0deg front camber
-0.5deg rear camber

[Edited on 26/10/06 by jos]

[Edited on 26/10/06 by jos]