Hi again all,

Has anyone got a pics of there handbrake cable routing, and what type have they used.

ideally on a live axle, as this is what I'm using.

Many thanks

I used two Allegro cables as per the book. Finished cables were cable tied to an additional bracket on top of the diff, so that they don't rub on the brake pipe.

HTH

David

[Edited on 24/9/06 by DavidM]
Rescued attachment P6160009.JPG

And I used a pivot piece to balance the cables in use so that they pull equally on each wheel. (Hidden by handbrake mount in the pictures).
The cables are well clear of the panhard rod so there were no issues with chafing.

[Edited on 24/9/06 by DavidM]

[Edited on 24/9/06 by DavidM]
Rescued attachment P1010052.JPG

it certainly does.

many thanks