I've just finished my combo tanks and fitted them today
I started with a cardboard mock-up and took it round to my local TIG welder and he copied my design in 3mm alloy and TIG welded it to perfection.
The windscreen wash tank has a good capacity of 2 litres and the brake & clutch side has three individual compartments which have a float switch
monitoring all three.
The design utilises the dead space above the rack and acts as a duct to direct the air up through the bonnet vent (there will be another panel under
the tank)
I'm a happy chappy
[Edited on 17-3-06 by RazMan]
Rescued attachment Combo Tank 2.jpg
Velly bling
Rescued attachment Combo Tank 1.jpg
Nice!
Nice one Mike.
You didn't tell me you had a "pet" TIG man!!
You got rig of the horrible bag then
BlockHeadRich is coming round Sun am to talk MegaSquirt so might pay you a visit.
quote:
Originally posted by BKLOCO
Nice one Mike.
You didn't tell me you had a "pet" TIG man!!
You got rig of the horrible bag then
BlockHeadRich is coming round Sun am to talk MegaSquirt so might pay you a visit.
Looks lurvley
Lovely peice of engineering
I like that a lot!
As a finishing touch I would add engraved or decal labels "Water" and "Hyd Fluid", and to prevent any chance of you having a blond
moment then spraying brake fluid all over your new paint job
Cheers
Fred EB
[Edited on 18/3/06 by Fred W B]
quote:
Originally posted by Fred W B
As a finishing touch I would add engraved or decal labels "Water" and "Hyd Fluid"