Went to stonleigh at the weekend weather was awesome so it was a good day.

Anyway seen loads of these wheels and and cant seem to find them anywhere anyone know what they are ?


13 inch rim

look similar to my TSW Razors but not quite the same. See my photo archive.

afaik,

they are caterham's own wheels.

will have a google and get back.
tom

They are indeed caterhams own new light wheels. They do a 13" and 15" in them

yep, £90 for 6x13 (4.78kg), £130 for 8x13(5.44kg).

they purty. they cheap aswell! if i'd have known, i wouldnt have bought the PR1s, although it say's they're de dion fitment only, so i don't know what hubs they'll be.

they also do 10 spoke 6.5x15 for£105.75(5.3kg)

well worth having hubs redrilled for imo
tom
Rescued attachment 8x13.jpg

stop beating me to reply

tom

... means good old ford fitment (4.25" pcd) and smallish offset (i.e. 10-20mm not the 30-40mm of the modern fords ike focus)

I think this means it's fine for the book dimensions, westfield, stuart taylor, etc but might have too little offset (i.e. wheels stick out too far) for the sierra based cars like Indys etc (although you can always play with the way you mount your wings, etc).

HTH,
Adam.

dedion caterham fitment is et18 and et23 iirc..

Ned.

My kj jupiter 6x14s are ET19 front and rear. They were standard fit to 80s de dion caterhams.

Adam

Ned

Do you know if that is et 18 front and et 23 rear? or the other way round?

Cheers

Mike

think wheels in original photos are copies of the caterham ones - or other way round. check centre hub on photo - built into wheel, and opening on c'ham offerings. also c. ones some fancy alloy, and photo ones standard alloy by the look of the finish. all in mho ofcourse, may well be wrong.
been thinking about the c ones for a while, so am interested in any "locost" alternatives.

those wheels are not these, but are superleggera wheels not very similar in terms of looks and weight to those?