i´m searching pictures of front wishbones from a sevenish car, which are yellow passivated or galvanized. i need those pics for getting an impression about the looks.

any pictures or links to pictures are appreciated.

[Edited on 23/11/14 by alfas]

Zinc plated wishbones

zinc plated

zinc plated lower

[Edited on 23/11/14 by minitici]

wow that was quick.....

i forgot to mention i would refer a pic from front of the car with installed whisbones....

Sorry I don't have installed pictures of the zinc plated wishbones.

The zinc finish is not very durable if used in all weathers on a road car although you could probably clear coat them.

I have used nickel plating on wishbones and this looks a lot better.

nickel wishbones

nemesisdoune

thats a good advice with the clear coat...as nickel-plating is very expensive over here...and there isnt any company locally doing it...

probably better getting them chromed over brass

brought them today to my local body and spray shop....due to some corrosion underneath the oiriginal (crappy) manufacturer powdercoat the corrosion needs to be removed before any further treatment.

as shot blasting (whatever type is used) will result in a rough surface the parts would be too rough for getting a visually nice passivated surface....

so i decided now for powdercoat, only the screwed in wishbone eylets, some small brakcets, all bolts and washers will get passivated.