Board logo

rear diff threaded hole
jabbahutt - 10/8/09 at 02:33 PM

afternoon all

If anyone knows what size hole this is or has a diff handy to measure I'd be grateful

Also from the photo it looks threaded can anyone confirm please

Thanks


[img] Description
Description [/img]

BenB - 10/8/09 at 02:37 PM

I think they're M12 at the front and M10 for the two at the rear. But I may be wrong.....

Mr Whippy - 10/8/09 at 02:41 PM

there doesn't seem anything to bolt it to though?

jabbahutt - 10/8/09 at 02:50 PM

I'm looking at bolting a bracket to it to hold my speedo sensor. If I know that the hole arrowed is threaded and what size it is I at least know my idea is feasible.

Cheers
Nigel

nick205 - 10/8/09 at 02:51 PM

^^^ Not on the Indy chasis, but there was when it lived under a Sierra's back side.

nick205 - 10/8/09 at 02:59 PM

quote:
Originally posted by jabbahutt
I'm looking at bolting a bracket to it to hold my speedo sensor. If I know that the hole arrowed is threaded and what size it is I at least know my idea is feasible.

Cheers
Nigel



IIRC the hole sits a little too far back to get a hex head bolt into it - possibly why MK never bothered including a chassis bracket for it.

You might get away with a socket cap set screw though

jabbahutt - 10/8/09 at 03:00 PM

Cheers Nick

I'll try it out tonight.