andrew.carwithen
|
| posted on 10/9/07 at 09:13 AM |
|
|
racetech centre mirror
I have fitted a 'Westfield' type bubble aeroscreen (as in pic below) and am looking for a suitable tall centre mirror.
I have been considering the racetech type but understand that it is available with either flat or convex glass.
Which is better for SVA purposes and aside from the edges of mirror needing trim to give correct radius, are there any other issues I need to be aware
of with this mirror?
Andy.
 
Rescued attachment avon front offside.jpg
|
|
|
|
|
graememk
|
| posted on 10/9/07 at 09:17 AM |
|
|
if you arnt sva'd i'd take the aero screen off
|
|
|
Agriv8
|
| posted on 10/9/07 at 09:19 AM |
|
|
quote:
Originally posted by graememk
if you arnt sva'd i'd take the aero screen off
Second vote for that
regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
TimC
|
| posted on 10/9/07 at 09:24 AM |
|
|
Nice looking Avon!!!!
|
|
|
mike smith1
|
| posted on 10/9/07 at 10:09 AM |
|
|
I have a convex Racetech centre mirror, and it gives a good clear rear view, really impressed for the size of the unit.
I had this on for the SVA and there was no comment made on the edges etc, the only thing i did was stretched a fairly large o-ring around it and left
it at that.
Flew through the test, even the tester commented on the good rear view, unless he was talking about the blonde receptionist!! 
Mike
[Edited on 10/9/07 by mike smith1]
|
|
|
mark.s
|
| posted on 10/9/07 at 10:28 AM |
|
|
quote:
Originally posted by TimC
Nice looking Avon!!!!
thats what i was going to say ......looks the nuts 
|
|
|
iscmatt
|
| posted on 10/9/07 at 10:36 AM |
|
|
I used a racetech convex mirror for my sva with no problems (i did use u-trim for the edges). The rear view with this mirror is pretty good.
|
|
|
worX
|
| posted on 10/9/07 at 10:38 AM |
|
|
If you are fitting wing mirrors aswell then I would think that you could get away with the flat centre mirror if you wanted.
I have the small flat racetech centre mirror and it is perfectly good enough - I have even mounted mine through the aeroscreen to the scuttle!
Steve
ps - nice looking avon!!!
|
|
|
Avoneer
|
| posted on 10/9/07 at 11:06 AM |
|
|
I've got an SVA friendly one you can have with a sucker on the bottom of it ???
After SVA, fork out and buy a SPA one - they're awesome - soooo much better than the Racetech one.
Will be a Donnington Saturday morning (weather dependant) if you want a nosey.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
Lightning
|
| posted on 10/9/07 at 12:25 PM |
|
|
Andy, I had the convex one. You could see much more. The front of the avon is lower than most, with a plain mirror you just see your shoulder. Mine
was a racetech.
Car looks great. Are you putting on the wider front wishbones at the front? Should be able to get hold of our jig if you wish to borrow it.
Steve
|
|
|
speedyxjs
|
| posted on 10/9/07 at 03:09 PM |
|
|
quote:
Originally posted by graememk
if you arnt sva'd i'd take the aero screen off
and put cycle wings on 
How long can i resist the temptation to drop a V8 in?
|
|
|
COREdevelopments
|
| posted on 10/9/07 at 04:28 PM |
|
|
sorry to disrupt the thread, is there any reason as to why you should leave the aeroscreen off for the sva? what would it fail on?
Reason i ask is that i just bought a carbonmods dash and aeroscreen and wanted the dash to meet up with the aeroscreen as its a bubble type like he
westy one.
rob
|
|
|
andrew.carwithen
|
| posted on 11/9/07 at 10:25 AM |
|
|
That's exactly what I have done - i.e. extended my carbon dash up to meet the profile of the aeroscreen (as in Pic below.) Therefore I cannot
remove the screen for sva. I have added trim to the sharp edge of the screen and also fitted 'tadpole' trim between the screen and scuttle
so I shouldn't have probs with regard to SVA?
Thanks for all the positive comments, guys. Must admit I'm pretty chuffed with the paint job as its my first attempt at spraying and it was done
in my garage using the 'Aldi' special offer compressor and spray gun!
Looks like I'll get the racetech mirror then. (Is it the same as the one MNR lists on its website for £15? If so, seems a good price!)
quote:
Originally posted by COREdevelopments
sorry to disrupt the thread, is there any reason as to why you should leave the aeroscreen off for the sva? what would it fail on?
Reason i ask is that i just bought a carbonmods dash and aeroscreen and wanted the dash to meet up with the aeroscreen as its a bubble type like he
westy one.
rob
 
Rescued attachment avon carbon dash.jpg
|
|
|
Avoneer
|
| posted on 11/9/07 at 11:07 AM |
|
|
Yep - the MNR one looks exactly like the Racetech one!
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
COREdevelopments
|
| posted on 11/9/07 at 06:22 PM |
|
|
yeh i like it, i didnt realise you had done it, but i was thinking about it as it looks much neater than a huge gap, so let me know if it passes.
rob
|
|
|
.JPG)
%20(WinCE).JPG)
