JAG
|
| posted on 5/5/05 at 08:41 AM |
|
|
Stuart Taylor Motorsport Chassis - Top harness Mounts
I passed SVA back in March but had some trouble because of the seats i had fitted to my Stuart Taylor chassis.
It seems that if you fit a padded seat (not a fibreglass racing seat) then the upper harness mounts are not far enough above the seat cushion. The
picture below shows the brackets I made to overcome this problem.
 
seat belt mod' finished/fitted
Justin
Who is this super hero? Sarge? ...No.
Rosemary, the telephone operator? ...No.
Penry, the mild-mannered janitor? ...Could be!
|
|
|
|
|
JAG
|
| posted on 5/5/05 at 08:43 AM |
|
|
and from the front;
 
seat belt mod' seen from front
They don't look so bad. They also do a nice job of holding the belts still and stop them flailing around.
Justin
Who is this super hero? Sarge? ...No.
Rosemary, the telephone operator? ...No.
Penry, the mild-mannered janitor? ...Could be!
|
|
|
