tims31
|
| posted on 27/3/17 at 04:22 PM |
|
|
Interior panel edges
With things progressing well over the last few days I am starting to look at things a bit closer with regards to IVA
How do people interpret the IVA manual when it comes to the edge projection of panels mounted along the tunnel.
My panels are mounted on the rails, have no sharp edges and do no project over the edges, will I still need to make some sort of edge protection for
these panels.
What have others done please?
This is mine
 
Description
Build: http://www.martinsfurybuild.co.uk/
|
|
|
|
|
big-vee-twin
|
| posted on 27/3/17 at 06:13 PM |
|
|
I rolled the top of mine so the corner was a smooth curve amd put rubber edging onto edge.
[img]
 
Gear Lever fitted
[/img]
[Edited on 27/3/17 by big-vee-twin]
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
LBMEFM
|
| posted on 27/3/17 at 06:14 PM |
|
|
I used lengths of 20mm aluminium angle with rounded exterior edge which I bought at MK, looks really good.
|
|
|
tims31
|
| posted on 27/3/17 at 07:32 PM |
|
|
quote:
Originally posted by LBMEFM
I used lengths of 20mm aluminium angle with rounded exterior edge which I bought at MK, looks really good.
That's the sort of thing I've been thinking of doing, do you have any pictures please
Build: http://www.martinsfurybuild.co.uk/
|
|
|
nick205
|
| posted on 28/3/17 at 07:56 AM |
|
|
I got picked up on this at SVA. I got round the issue by glueing some tadpole rubber trim along the edges. It looked OK and resolved the issue for
SVA. Could have removed it after the SVA, but decided to leave it in place.
|
|
|
SteveWallace
|
| posted on 28/3/17 at 11:04 AM |
|
|
I trimmed mine with some car carpet. Easy for it to fall off again after IVA if you want, but I quite like it and I wasn't really trying to go
for the lightest car possible (other wise I wouldn't have built a Viento), so it's still on.
 
Description
"I know every nut and bolt and cog in that car, I built it myself" - The Prisoner, 1967
|
|
|
