billy
|
 posted on 30/10/04 at 07:08 PM |
|
|
I just had to have these
Hi all the building buddies out there, just brought these today from halfords and wondered if they would be ok for the sva???. there nice and grippy
and must work better than glueing on some sand paper to me pedals. wot do you think?
 
Rescued attachment pedals.jpg
luego-lo-cost finished,vauxhall 16v 2.0,twin 45s de-dion rear set up
|
|
|
|
|
David Jenkins
|
| posted on 30/10/04 at 07:10 PM |
|
|
Can't see any reason why they wouldn't be acceptable - just make sure that they're fixed on properly.
rgds,
David
(usual disclaimer applies - it's your own decision!)
|
|
|
mangogrooveworkshop
|
| posted on 30/10/04 at 07:24 PM |
|
|
Macspeedy has got through SVA with the own brand ones that halfrauds sell. Im going the same way locost! If you are worried tat the may fail Rally
design do a set of rubber knobs that pull thru the holes.
hope that helps ya
[Edited on 30-10-04 by mangogrooveworkshop]
|
|
|
Ben_Copeland
|
| posted on 30/10/04 at 07:25 PM |
|
|
As long as they fit in there... and are grippy. Should be ok. Not my cup of tea personally
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
Hellfire
|
| posted on 30/10/04 at 07:42 PM |
|
|
As ben says - they have to be 'grippy' for SVA.
I'm sure I read somewhere they are not suitable, but could be wrong.
|
|
|
billy
|
| posted on 30/10/04 at 09:02 PM |
|
|
phew........thanks chaps this cost me £29, glad i aint wasted me cash
luego-lo-cost finished,vauxhall 16v 2.0,twin 45s de-dion rear set up
|
|
|
PAUL FISHER
|
| posted on 31/10/04 at 01:55 AM |
|
|
momo pedals
I fitted the same pedals to my car pre SVA
and it passed the SVA with them fitted.
|
|
|
