Kartdad
|
| posted on 29/8/10 at 03:07 PM |
|
|
Sierra pedals photos needed
Hi I am just looking at the Sierra pedal set and I am wondering how any of you have fitted them, I am building a Locost from the book. Any good
photos you could point me at and advice would make my bank holiday Monday a little less frustrating
Many thanks
[Edited on 29/8/10 by Kartdad]
|
|
|
|
|
RichardK
|
| posted on 29/8/10 at 03:10 PM |
|
|
I've got some in my earlier picture in my gallery (link below) before I changed to floor mounted pedals.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
Mark Allanson
|
| posted on 29/8/10 at 03:26 PM |
|
|
try this one
 
Sierra Pedal Box
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Mark Allanson
|
| posted on 29/8/10 at 03:28 PM |
|
|
..and just before SVA
 
Description
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Chippy
|
| posted on 29/8/10 at 09:41 PM |
|
|
I shortened my pedals, (see attached), and set the pedal box almost level with the top of the frame. If you trawl through some of my archive you will
see how in more detail. HTH Ray
 
Pedal mod's.
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
Mark Allanson
|
| posted on 29/8/10 at 09:57 PM |
|
|
I used the std sierra MC so shortening the pedals would have increased the pedal effort beyond the SVA acceptable limit
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Chippy
|
| posted on 30/8/10 at 04:57 PM |
|
|
Ah! good point Mark, my car is fitted with the donors power brakes so pedal ratio no problem. Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
