iiyama
|
| posted on 6/2/09 at 11:37 AM |
|
|
cycle wing edging
Will I need to put edging on these? If so is it required all round? Or just on the front edge and maybe back along the sides for an inch or two?
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
|
|
fesycresy
|
| posted on 6/2/09 at 11:43 AM |
|
|
I would say yes, herringbone all the way around.
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
cloudy
|
| posted on 6/2/09 at 11:43 AM |
|
|
Which cycle wings are they?
www.warnercars.com
|
|
|
iiyama
|
| posted on 6/2/09 at 11:46 AM |
|
|
they're mine!!! LOL
Actually they are a Dax copy, I took a mould from the originals and then made em out of carbon.
Anyway, back to a more serious note, edging?? Herringbone is not an option!!!!!! 
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
cloudy
|
| posted on 6/2/09 at 11:52 AM |
|
|
no no back to the cycle wings! Can you make more?
www.warnercars.com
|
|
|
nick205
|
| posted on 6/2/09 at 12:00 PM |
|
|
They will need covering fully for SVA IMHO.
IIRC you can get herringbone with and without internal metal springing. Get the one without which shouldn't damage the wings and then let it
fall off post SVA.
|
|
|
iiyama
|
| posted on 6/2/09 at 12:09 PM |
|
|
Was going to use rubber u section with a dab of super glue in the underside edge. Just wasnt sure if a/ It was needed and b/ if it was needed all
round!
Yup, can make as many as I like!!
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
coozer
|
| posted on 6/2/09 at 12:13 PM |
|
|
Well, as pointed out before fit a HUGE indicator carring bull bar and theres no need to spoil the wings.
No trim round my cycle wings at SVA. They were behind the front of the car so out of the test.
Oh, and how much are you charging for a pair??
Steve
[Edited on 6/2/09 by coozer]
1972 V8 Jago
1980 Z750
|
|
|
iiyama
|
| posted on 6/2/09 at 12:17 PM |
|
|
So because I have these:-
I dont need edging??? Result!!!!
£185 a pair inc P+P. Pre preg carbon face ply backed up with two ply of pre preg glass.
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
coozer
|
| posted on 6/2/09 at 12:23 PM |
|
|
This is mine on the day, no trim passed OK.
 
Rescued attachment SVA.JPG
1972 V8 Jago
1980 Z750
|
|
|
iiyama
|
| posted on 6/2/09 at 12:28 PM |
|
|
cool, maybe wait and see if Southampton accept them without then.
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
mcerd1
|
| posted on 6/2/09 at 12:34 PM |
|
|
dax sell you some small rubber edging stuff for this (come in one of the packs or a couple of £)
most people seem to attach it with silicon and it mysteriously falls off on the way home from the test
I'm sure someone on the other forum will have some spare
|
|
|
RoadkillUK
|
| posted on 6/2/09 at 01:10 PM |
|
|
quote:
Originally posted by iiyama
Was going to use rubber u section with a dab of super glue in the underside edge. Just wasnt sure if a/ It was needed and b/ if it was needed all
round!
Yup, can make as many as I like!!
We used small rubber U section on ours for SVA in 2004. It's still on now, that superglue was good.
Roadkill - Lee
www.bradford7.co.uk
Latest Picture (14 Sept 2014)
|
|
|
philhoward
|
| posted on 6/2/09 at 01:35 PM |
|
|
Try Seals + Direct for rubber U channel trim. It can be found on the extrusion page
|
|
|
.jpg){kind=avatar}
